When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Help putting front end back together.....71 F250 Camper Special
Folks,
so I got all my front patrs back from the powder coater and starting to reassemble!! WOOOHOO!!
Prob is I can't figure out how the coil springs sit on the Ibeams. I have looked at the online diagrams but they aren't very clear.
Anyone have a good picture of the front end assembled? Here are a couple shots of what I currently have.
Thank you TurboHunter!! It was actually a screwup with my powder coater, he gave me such a great deal I just didn't have the heart to ask him to do it over. It was supposed to match the rest of the truck........
Brady: I took the spindles with a new King PIn set to National Auto here in Lake Elsinore. Only one I could find with a reamer only thing I am reusing without replacement or rebuild is the bolts
I got the king pins from napa!! 114.00. Then national auto charged me 130.00 for the labor.
I could have used the original ones I guess, but this way I KNOW its new