Hey fellas.

I am needing to see if any of you uni afficianados would have some information.

I have a 64 f-250 that I am slowly doing a cummins conversion on.I am really wanting to make it a four door so my family will get more use out of it.I have kicked this around off and on for a year or more.A friend of mine has presented me with a deal on a 250 uni truck that is a good donor.I know it wont be correct because of some differences.But I am thinking a 4 door uni would be pretty cool.I will drive this thing when it is done it will not be a museum piece or show queen.
My question is if the rear of the frame on a uni if it is different in the kick up from a non uni frame.I know I will be doing drastic frame work to make the extra cab room but am preparing a plan for from cab rear to bed as I will prob add under the cab on the flat area there.
a pic of someones uni frame profile would be awesome so I can compare with my present frame.
Thanks for any help!

 

The Uni f250 frame and the standard F250 frame are identical. In 64 there will be minor bolt locations difference for the new beds

Garbz

 

thanks! I was figuring that but any time i assume....well you know! now I just have to get the uni to the house.....I am excited about a uni crew.....I may come to regret it but it will prob be something I wont see another of locally...

 

Just look in my album. I built a 66 Uni Crew split bed. Might give you some ideas.

https://www.ford-trucks.com/user_gal...=79811&width=2

Garbz