You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I have a good WMO source and wondering how my 6.0 would do on a WMO/RUG blend. I've read both sides of the fence; not a good idea and I've been doing it for years. Any actual users here?
__________________
2004 F250 6.0 Auto, Lariat, FX4, Supercab longbox, stock for now.
1996 F350 XLT Reg cab longbox, tymar, BTS trans, Bills chip, guages, Bilsteins, urethane bushings and other mods, now gone but not forgotten. <><
I guess no one does. Well I'm going to sell my 04 and go back to a 7.3. I was lucky to get 4 relatively trouble free years out of the 6.0. Will now be looking for a nice 02-03. Sure will be nice to have a 7.3 again and not be afraid of mods.
__________________
2004 F250 6.0 Auto, Lariat, FX4, Supercab longbox, stock for now.
1996 F350 XLT Reg cab longbox, tymar, BTS trans, Bills chip, guages, Bilsteins, urethane bushings and other mods, now gone but not forgotten. <><
What are you blending with the waste motor oil? I've run biodiesel through my 6.0L off & on several times (commercial availability permitting) and haven't had a problem. But I've heard some really nasty things about using waste motor oil for a fuel in diesel engines. A shop heater is one thing, but injectors and lift pumps are allot pickier than a shop heater.
__________________
FTE Arkansas chapter member
1972 Ranchero GT (351C CobraJet intake)
2001 Explorer XLT 2WD
2004 F250 6.0L 2WD CC "Pavement Princess"
2007 Monaco Starwood SL 31BHD
2012 Focus SEL (Wife's ride)
What are you blending with the waste motor oil? I've run biodiesel through my 6.0L off & on several times (commercial availability permitting) and haven't had a problem. But I've heard some really nasty things about using waste motor oil for a fuel in diesel engines. A shop heater is one thing, but injectors and lift pumps are allot pickier than a shop heater.
Mixing 85% WMO with 15% RUG(regular unleaded gas) aka W85. Many run this blend from what I've read. I won't do it in my 6.0 but I will in a 7.3 or at least try.
__________________
2004 F250 6.0 Auto, Lariat, FX4, Supercab longbox, stock for now.
1996 F350 XLT Reg cab longbox, tymar, BTS trans, Bills chip, guages, Bilsteins, urethane bushings and other mods, now gone but not forgotten. <><
I've got 4,000 miles on a 6.0 PS running 80/20 and she runs fine. She has been smoking a bit, but Jody at DP-Tuner is going to write some custom tunes for it....I'll let you know
I'm very happy to report that I got my new tune from DP-Tuner (Thanks Jody!) and she doesn't smoke anymore on the 80% WMO / 20% Regular Gas blend and with the custom 80 Econo tune it's got way more power than before.....the exhaust even smells like normal diesel exhaust.....I'm lovin' it!
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
Any actual users here?
