Must be good, I am putting things together.
Anyone got a good diagram that shows the orientation of the plates that go around the brake and clutch pedal, there are 3 of them that fit together and there should be rubber seals on some surfaces.

Thanks

 

There actually 4 metal plates, two for the bottom and two for the top, and the 3 rubber seals, one for the brake, one for the steering column, and one for the clutch(if you have one) the rubbed is sanwhiched between the metal plates. Call up Mid Fifties they sent me a pic on how it all goes together, when I bought replacement rubber. But if you play around with all the pieces it only goes toghter (lays flat) one way.

Here's a pic from MF's catalog.

 

Thanks, great drawing but I quess I forgot to mention my truck is a 52 F1. One similar to this but for a 52 would be great.

Thanks