You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I am searching for a good condition manual transmission crossmember for a 1993 Ford F-350 4x4. I am pretty sure any one from the 1987-1997 time frame will work. I would prefer one to be free of scale, surface rust is OK.
-Mark
__________________
1990 F-250 7.3 IDI, ZF-5, SMF, Dana 60, plow truck
1995 F-350 PSD, ZF-5, SMF, 4x4 SRW, 300,000 mi
1993 F-350 CCLB Cummins conversion is progress
I have the crossmember along with both side brackets for a '91 F-150, might be the same since a ZF is a direct swap into a 150 with a 5spd. Don't think it has any surface rust on it, came from eastern Oregon and we don't salt our roads. Does have a small cut in it that a hack exhaust shop did.
__________________
James
2003 F350XL SRW SCLB 6.0 4x4 ZF6
I keep getting errors while trying to load the pics on the site I use to store them. The 3 parts are dirty, but with a good wash they still have most of the black paint on them with some surface rust in the area's that have flaked off. I'm thinkin $25 plus shipping/fees....If your still interested let me know and I'll try harder to get the pics up or PM an email and I'll send them direct.
__________________
James
2003 F350XL SRW SCLB 6.0 4x4 ZF6
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
