Painted my turbo - Plus intercooler finally plumbed....pics(9/15/11)!!
#46
i did the whole RDT into exhaust and i used to have it at 45* angle going into the bottom of exhaust down near tranny... id get leaks all over...nmb2 saw it and told me to trim the hose and put the inlet on the side or top of pipe...NO LEAKS ANYMORE. I know i produce lots of blow by so the oil would pool up at the lowest point of the hose and somewhat clog the system. im using 3/4" hose and barb. and the added bonus..no oily turbo/intake
#47
i did the whole RDT into exhaust and i used to have it at 45* angle going into the bottom of exhaust down near tranny... id get leaks all over...nmb2 saw it and told me to trim the hose and put the inlet on the side or top of pipe...NO LEAKS ANYMORE. I know i produce lots of blow by so the oil would pool up at the lowest point of the hose and somewhat clog the system. im using 3/4" hose and barb. and the added bonus..no oily turbo/intake
#48
There are some pics of what I have so far on OBN and PSN in the latest supercharger threads over there. So, you can see what I have thus far over there. My user name over on both sites is 88 Ford.
#49
Ill post current pics later, I don't want to clutter up snaps thread too much so here is a link that has some old pics of the setup
https://www.ford-trucks.com/forums/s...all....finally
https://www.ford-trucks.com/forums/s...all....finally
#50
Ill post current pics later, I don't want to clutter up snaps thread too much so here is a link that has some old pics of the setup
my ATS install...finally - Ford Truck Enthusiasts Forums
my ATS install...finally - Ford Truck Enthusiasts Forums
Thread
Thread Starter
Forum
Replies
Last Post
snaponprofile
1983 - 2012 Ranger & B-Series
14
05-26-2012 03:55 PM
snaponprofile
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
68
04-11-2012 05:14 PM
snaponprofile
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
33
02-07-2012 01:29 AM
snaponprofile
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
41
10-28-2011 08:27 AM
snaponprofile
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
37
08-27-2011 09:05 PM