WIRING for 01 mirrors to 04 towing mirrors

Reply Subscribe

Thread Tools

Search this Thread

06-27-2011, 07:38 PM

878ranger878

Freshman User

Thread Starter

Join Date: Jan 2011

Posts: 26

Likes: 0

Received 0 Likes on 0 Posts

WIRING for 01 mirrors to 04 towing mirrors

I have my new 04 power heated signal towing mirrors that im going to install on my 01 f250 with power paddle mirrors. I have some wiring questions...

Do these wires seem to be labled right?
MIRROR
Black w/white stripe – HEAT
Brown – PARKING LIGHT
Black – GROUND
Mint green – LEFT TURN SIGNAL
White – RIGHT TURN SIGNAL
Yellow – MOTOR
Red – MOTOR
Blue – MOTOR
TRUCK
Brown – PARKING LIGHT
Light Green w/white stripe – LEFT TURN SIGNAL
White w/light blue stripe – RIGHT TURN SIGNAL

In the below picture do those look like the correctly labeled wires (they were found to the left of the steering column)

In the below picture does any one know what wire sends the light to the lock switch to make it light up? (im going to splice my heat into this)

In the below picture is the paddle mirrors connectors in the door. Im assuming these wires power the mirror motors. Does anyone know what color wires in the door go to the 04 mirrors wires which are red, blue, and yellow?

THANK YOU SO MUCH FOR YOUR HELP IT MEANS ALOT!!!!!

Reply Like

06-28-2011, 06:21 AM

BigPigDaddy

Cargo Master

Join Date: Sep 2007

Location: OR and UT

Posts: 2,624

Likes: 2

Received 4 Likes on 3 Posts

I don't know what each wire is, but if you have a test light you can at least figure out which is the illumination wire that you want to use for heat.

This will bump you also.