Front Wheel Hub needed for '66 2wd

66CustomCab · #1 (**permalink**) 06-19-2011, 08:14 PM

Like the title says, I need a good used front hub for my 2wd '66 custom cab long bed with auto trans & 352 V8. Anyone parting out a likely donor?

Mine damaged original is on the left. All I seem to be able to find are ones like on the right, which are 1/2" 'too tall' as pictured.

mal68ibu · #2 (**permalink**) 06-22-2011, 11:10 AM

I have a 65 F100 I'm parting out. My interchange lists 64 - 66 as being the same for 2wd f100. If you could get me a measurement from the drum mounting surface to the top of the bearing housing I can measure mine and see if I have a match.
Adam 415-359-3822

66CustomCab · #3 (**permalink**) 07-07-2011, 11:11 AM

Sorry for the late reply. My hub measures approximately 4-3/16" from face to face. I called & left a mssg. Kevin

NumberDummy · #4 (**permalink**) 07-15-2011, 07:39 AM

1964/67 F100 2WD's use the same front brake drum, so the hub is the same. 1964/66 (and later): Ford did not sell the hub by itself, it was only sold as a hub & drum assy.