Go Back   Ford Truck Enthusiasts Forums > Super Duty/Heavy Duty > Large Truck
Sign in using an external account
Register Forgot Password?


Large Truck My truck is bigger than yours. The forum for 2+ ton trucks (all years), COE's, Louisville's, Big-Job's etc.

Welcome to Ford-Trucks Forums!
Welcome to Ford-Trucks.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Ford-Trucks Forums community today!





 
Reply
 
LinkBack Thread Tools Search this Thread
  #1 (permalink)  
Old 06-12-2011, 08:51 AM
IceCreamMike IceCreamMike is offline
New User
 
Join Date: Jun 2011
Posts: 6
IceCreamMike is starting off with a positive reputation.
Looking for some misc. Parts for C series

I am very close to what most would call completion on my truck. I figure I will never be done. I was wondering if anyone knows were I could source the following. I would also like to mention I had to buy a donor C for this project which I would be happy to part out. The alternative is to call a scrapper/truck dealer. Please contact me for pics.

1. Door seal
2. Running lights that match the holes? Or am I dreaming and I should just patch drill for new different ones
3. Also looking for a source for wheel covers preferably used, steel, matching and reasonably priced. Is there such a thing?
4. Since I want to install carpet in the cab. Is there a product out there that "finishes" the ends of the carpet thinking of something that is plastic that can be screwed down like an edge.

I apologize for sounding like a novice when it comes to this stuff. Because I am a novice this truck has been my first project. I would appreciate any and all feed back.
Reply With Quote
  #2 (permalink)  
Old 06-13-2011, 09:04 AM
Krewat's Avatar
Krewat Krewat is offline
Super Moderator
 
Join Date: Jul 2002
Location: Long Island USA
Posts: 34,293
Krewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputation
Since the original poster has less than 25 posts, and can't receive PMs, if anyone has anything to offer, post your email address and ask IceCreamMike to contact you directly.

No discussing prices or availability.

thanks
__________________
- art k. - Moderator for the Superduty, V10, 6.2L and FE forums
'13 Taurus SHO 3.5L Ecoboost w/Perf Pkg
'01 F250SD SC SB XLT V10 4x4 Volant CAI Hedman headers 5-star custom tunes on SCT X3
'97 Cougar XR7 30th Anniv Edition 4.6L
'74 F250 Highboy FE390 deceased!
I've been wrong before, I'll be wrong again. Just wait and see. ®
Reply With Quote
  #3 (permalink)  
Old 06-13-2011, 04:07 PM
IceCreamMike IceCreamMike is offline
New User
 
Join Date: Jun 2011
Posts: 6
IceCreamMike is starting off with a positive reputation.
Quote:
Originally Posted by Krewat View Post
Since the original poster has less than 25 posts, and can't receive PMs, if anyone has anything to offer, post your email address and ask IceCreamMike to contact you directly.

No discussing prices or availability.

thanks

Thank you sir.
I was looking for sources as much as specific items.

Mike
Reply With Quote
  #4 (permalink)  
Old 06-16-2011, 01:30 PM
NumberDummy's Avatar
NumberDummy NumberDummy is offline
Ford Parts Specialist
 
Join Date: Nov 2006
Location: Hacienda Heights CA
Posts: 54,074
NumberDummy has a superb reputationNumberDummy has a superb reputationNumberDummy has a superb reputationNumberDummy has a superb reputationNumberDummy has a superb reputationNumberDummy has a superb reputationNumberDummy has a superb reputationNumberDummy has a superb reputationNumberDummy has a superb reputationNumberDummy has a superb reputationNumberDummy has a superb reputation
Quote:
Originally Posted by IceCreamMike View Post
I am very close to what most would call completion on my truck. I figure I will never be done. I was wondering if anyone knows were I could source the following. I would also like to mention I had to buy a donor C for this project which I would be happy to part out. The alternative is to call a scrapper/truck dealer. Please contact me for pics.

1. Door seal
2. Running lights that match the holes? Or am I dreaming and I should just patch drill for new different ones
3. Also looking for a source for wheel covers preferably used, steel, matching and reasonably priced. Is there such a thing?
4. Since I want to install carpet in the cab. Is there a product out there that "finishes" the ends of the carpet thinking of something that is plastic that can be screwed down like an edge.
1) Door seal: Which one(s)? There are vent window weatherstrips, inner and outer door belt weatherstrips, door weatherstrips that fit around the circumference, division bar weatherstrips.

2) Running lights that match the holes. What type of "running lamps?" Where are the holes?

3) AFAIK, FoMoCo never offered wheel covers or hubcaps for C Series Trucks.

4) These are refered to as scuff or sill plates, Ford first offered them for the C Series in 1978.

D8HZ-9013208-A .. Right Scuff Plate / Obsolete

GREEN SALES CO. in Cincinnati OH has ONE = 800-543-4959.
----------------------------------------------------------
D8HZ-9013209-A .. Left Scuff Plate / Obsolete

GREEN SALES CO. has TWO.

No Ford Dealer, no other obsolete parts vendor has either one.

Let me know about the w/strips, running lights...I'll see if anyone has any NOS (New Old Stock).

AFAIK, no one is reproducing C Series parts, but it's essentially the same truck from 1957 thru 1986
__________________
Bill / Retired Ford Parts Manager / Part number research: 1928/2001 trucks & 1928/89 passenger cars.

2013 Escape FWD 2.0L Eco-Boost
Reply With Quote
  #5 (permalink)  
Old 06-16-2011, 01:50 PM
Krewat's Avatar
Krewat Krewat is offline
Super Moderator
 
Join Date: Jul 2002
Location: Long Island USA
Posts: 34,293
Krewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputationKrewat has a superb reputation
Quote:
Originally Posted by IceCreamMike View Post
Thank you sir.
I was looking for sources as much as specific items.
Not a problem, I think NumberDummy has you covered
__________________
- art k. - Moderator for the Superduty, V10, 6.2L and FE forums
'13 Taurus SHO 3.5L Ecoboost w/Perf Pkg
'01 F250SD SC SB XLT V10 4x4 Volant CAI Hedman headers 5-star custom tunes on SCT X3
'97 Cougar XR7 30th Anniv Edition 4.6L
'74 F250 Highboy FE390 deceased!
I've been wrong before, I'll be wrong again. Just wait and see. ®
Reply With Quote
  #6 (permalink)  
Old 07-31-2011, 10:24 AM
Mike-fire32's Avatar
Mike-fire32 Mike-fire32 is offline
Junior User
 
Join Date: Jun 2007
Location: Longview, WA
Posts: 50
Mike-fire32 is starting off with a positive reputation.
Mike, I purchased one NOS door seal for my C series fire truck and it was different that what I removed, so Ford apparently changed design along the way. Look for a dealer for Auveco products and you should be able to find bulk door seal material that will fit. Your C series looks newer than mine, so you may actually find an exact match.

As for the wheel covers, check out Real Wheels, Phoenix or Roadmaster. They all make stainless wheel covers for the larger wheels. You should have 22.5 wheels and will find plenty to options. These are used on fire trucks all the time when they want to dress things up but don't want to invest in aluminum wheels.

I just got done painting my truck inside and out, so I know all too well the work involved. I replaced the windshield rubbers, the wing window rubbers and a couple of the whisker seals, but that was all I could find at the time. Get the Ford truck parts CD and check out the NOS parts places. I found Green Sales to have the most stuff.

I started a post for C series owners, so find that and upload a picture of your truck.
Reply With Quote
  #7 (permalink)  
Old 07-07-2012, 02:03 PM
madrid london's Avatar
madrid london madrid london is offline
Senior User
 
Join Date: Jun 2012
Location: Southern Nevada
Posts: 145
madrid london is starting off with a positive reputation.
i realize it was a year ago that you posted this; but do you still have your donor truck[skeleton]???
__________________
Tom, Marching Band Booster dad
Reply With Quote
Old 07-07-2012, 02:03 PM
Reply

Go Back   Ford Truck Enthusiasts Forums > Super Duty/Heavy Duty > Large Truck

Tags
1960, 61, 74, cseries, f150, ford, forum, outer, parts, plate, scuff, series, truck, truckc, weatherstrip

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump



All times are GMT -5. The time now is 11:22 PM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.5.2 ©2010, Crawlability, Inc.
Advertising - Terms of Use - Privacy Statement - Jobs
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.

vbulletin Admin Backup