Plans for the long weekend?
#1
Plans for the long weekend?
Since the boys I work for are out of town for the weekend I thought I might get a few of my projects out of the way. First is the engine swap in my 53, the rear main is leaking and it will have to come out to replace, so I'm putting the low mileage engine out of my car in it. After I get through with that I think I'll go ahead and put the Vintage Air unit in that's been collecting dust for over a year.
I keep this up and one of these days I might have a finished truck
Anybody else got plans to work on a project? Or is this gonna be a R&R weekend?
I keep this up and one of these days I might have a finished truck
Anybody else got plans to work on a project? Or is this gonna be a R&R weekend?
#2
It will never happen. Unless your a very motivated and task-orientated individual. I'm not saying your not...just most projects are never done.
Well, 6 weeks ago we were going to take the kids to Branson for the weekend as a surprise mini-vacation. Thanks to a jerk at work (who happens to be #2 in the office) that ain't going to happen. I'm going to spend Saturday moving the camper from FSM to Peculiar, MO. I'm not sure which ticks me off more. Getting forced out of Carthage or getting sent to Harrisonville (suburb of KC). Not sure why I keep doing this railroading thing.
#4
#5
Sounds like you need the lighter 365VT/6.0LBelieve me, it's still fresh on my mind; but she's still sitting in Fort's Myth. Went by the dealership's body shop Friday about 1100 hoping that the truck was finally done, especially since I got it's new plates. That's a negative there ghostrider, they're still trying to figure out how to wire-in the 5th wheel plug; someone forgot to order the spare tire tools that go behind the rear seat and the painter hasn't buffed it out yet. So, I got to make a 260 mile trip dragging the camper with the Explorer.
#6
Sounds like you need the lighter 365VT/6.0L
Believe me, it's still fresh on my mind; but she's still sitting in Fort's Myth. Went by the dealership's body shop Friday about 1100 hoping that the truck was finally done, especially since I got it's new plates. That's a negative there ghost rider, they're still trying to figure out how to wire-in the 5th wheel plug; someone forgot to order the spare tire tools that go behind the rear seat and the painter hasn't buffed it out yet. So, I got to make a 260 mile trip dragging the camper with the Explorer.Yeah, I think if I had shoveled that much rock out of the back of my truck I'd need some R&R for a couple of days as well
#7
Let's see. Weed eated the back yard. Mounted the trailer hitch and wiring on my bike. Changed out the back tire on my bike and took a short test ride. Today it's change the oil in both bikes and haul the bike trailer(pull behind, not put the bike on type)out and clean it up and pack the wheel bearings. Then it's all good, just waiting for Thursday night to pack the trailer so we can hit the road Friday.
Oh, I'll probably spend Monday mowing the rest of the yard.
Oh, I'll probably spend Monday mowing the rest of the yard.
Trending Topics
#8
That ain't happening You can keep your 6.0h-no.
You know the old saying about the best laid plans of mice and men.... well mine just ain't going quite as planned. Started off yesterday by straining my back lifting a pressure washer, been working all weekend under the influence of pain meds Then when I pulled the engine out of the truck, the torque converter decided to hang in the crankshaft, so now I need a new front seal for the trans. Looks like it'll be later in the week before this job is done. A/C install is going good though, should have cold air when I get the truck running
You know the old saying about the best laid plans of mice and men.... well mine just ain't going quite as planned. Started off yesterday by straining my back lifting a pressure washer, been working all weekend under the influence of pain meds Then when I pulled the engine out of the truck, the torque converter decided to hang in the crankshaft, so now I need a new front seal for the trans. Looks like it'll be later in the week before this job is done. A/C install is going good though, should have cold air when I get the truck running
#9
Aw, come on...you know you really want one. Think of all the fun & unbridled power you could have with it.
I don't take meds very often...especially pain pills. But when I wrecked the scooter in '07 they put me on some stuff based on my weight. You want to talk about out there in deep space. Wife said I'd just lay there in bed & drool...I don't remember anything for two days afterwords is all I'm going to say. Hope you feel better soon though.This is a good thing, I pitty anyone that doesn't have a/c in their ride during the summer.
#10
#11
Err, let me get back to you on that one. Life's rough when your the only one carrying the 6.0L flag around here.
This thread would only get more entertaining if the V10 clown in the SD forum would jump in here & throw the gantlet down about how great the V10 is and how there ain't a motor in a Ford that could do what he thinks he can.
#12
#13
Ok, ok..everyones a commedian around here anymore; clearly I need to recruit a couple of 6.0L guys to join the chapter. I knew I'd come up with something...just took me a bit to realize this. Joe I'm not sure if you've noticed or not; but most of the parts/upgrades Clay carries at RiffRaff are for the 7.3L. I'd say 75%-80% are specific to the 7.3L...not the 6.0L, sounds like the 7.3L has some flaws and needs quite the support to keep up with the 6.0L powered trucks
(putting on his big-boy pants; waiting for the next round)
(putting on his big-boy pants; waiting for the next round)
#14
Ok, ok..everyones a commedian around here anymore; clearly I need to recruit a couple of 6.0L guys to join the chapter. I knew I'd come up with something...just took me a bit to realize this. Joe I'm not sure if you've noticed or not; but most of the parts/upgrades Clay carries at RiffRaff are for the 7.3L. I'd say 75%-80% are specific to the 7.3L...not the 6.0L, sounds like the 7.3L has some flaws and needs quite the support to keep up with the 6.0L powered trucks
(putting on his big-boy pants; waiting for the next round)
(putting on his big-boy pants; waiting for the next round)
Much much more is coming for the 6.0L
#15
Yip, like I said...must be a weaker motor. Got a guy in Oregon that's built up a good operation/company "helping" improve the 7.3LYour not helping me in my crusade Clay.