Project Extreme Duct Tape
#19
Join Date: Jul 2010
Location: Saint Charles, Missouri
Posts: 960
Likes: 0
Received 3 Likes
on
3 Posts
SO, im a pretty hapy camper right now.
When i got the truck, he said the slave cylinder was weak. Then the other day i lost pressure almost completely. I started checking around and i felt like an idiot because my buddy said "check the fluid level"......IT WAS LOW filled it up and it has full pressure.
Pics to come:
Wiring up push-button ignition switch
8" miter cut stack
Hooking up transfer case linkage
Test mud run!
When i got the truck, he said the slave cylinder was weak. Then the other day i lost pressure almost completely. I started checking around and i felt like an idiot because my buddy said "check the fluid level"......IT WAS LOW filled it up and it has full pressure.
Pics to come:
Wiring up push-button ignition switch
8" miter cut stack
Hooking up transfer case linkage
Test mud run!
#20
SO, im a pretty hapy camper right now.
When i got the truck, he said the slave cylinder was weak. Then the other day i lost pressure almost completely. I started checking around and i felt like an idiot because my buddy said "check the fluid level"......IT WAS LOW filled it up and it has full pressure.
Pics to come:
Wiring up push-button ignition switch
8" miter cut stack
Hooking up transfer case linkage
Test mud run!
When i got the truck, he said the slave cylinder was weak. Then the other day i lost pressure almost completely. I started checking around and i felt like an idiot because my buddy said "check the fluid level"......IT WAS LOW filled it up and it has full pressure.
Pics to come:
Wiring up push-button ignition switch
8" miter cut stack
Hooking up transfer case linkage
Test mud run!