redoing my suspension on my 71 f250 crew cab 4x4 and adding SD leaf springs fabbing up a new front crossmember and lost my measurements for where the stock front solid leaf mount hole is can anyone give me the measurement from center of the front solid leaf spring bolt hole is to the center of the rear shackle mount bolt hole is the one that go's through the frame at the top of shackle thanks for any help

 

Bump for some help

 

My truck is a 72 f250 4x4 standard cab.

I took a picture of the starting measuring point and the ending point.

Hope this helps.

-Destin

 

Thanks for the measurement with pics from what it looks like its just about 53" from center to center right

 

Yes, exactly 53".

-Destin

 

Alright good to know this information will help me a lot anyone else confirm this before I start cutting into it