You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Looking for any and all information on this Vacuum gauge. I took it out of this truck F10JR446633
The truck had a 292 or 312 in it, possibly from a car. The vacuum gauge was mounted in the cab. Anybody can help, I'd appreciate it.
<TABLE border=0 cellSpacing=0 cellPadding=0 itxtNodeId="29" itxtHarvested="0"><TBODY itxtNodeId="30" itxtHarvested="0"><TR itxtNodeId="33" itxtHarvested="0"><TD bgColor=#dfdfdf colSpan=2 itxtNodeId="44" itxtHarvested="0">Description: </TD></TR><TR itxtNodeId="32" itxtHarvested="0"><TD bg*************** colSpan=2 align=middle itxtNodeId="46" itxtHarvested="0">
</TD></TR></TBODY></TABLE>
__________________
Staying low for now
64 lowered longbed
Robert
Looks like it's in great shape. Is there a bezel on it?
I do have the bezel for it. The plastic lens was cracked and warped. I was able to remove it. (very carefully) so I can test the gauge. The gauge works great. I just have to put a new lens on it. Thanks for all your information.
__________________
Staying low for now
64 lowered longbed
Robert
Nice piece Robert
How/where you going to mount it?
__________________
'08 Super Duty 6.4, '61 Unibody, '63 T-bird, '66 Mustang
'76 F750 Firetruck, '83 F150, '74 F-1004x4 shrtbx
And not enough time to drive 'em.
Marc
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
