Looking for any and all information on this Vacuum gauge. I took it out of this truck F10JR446633
The truck had a 292 or 312 in it possibly from a car. The vacuum gauge was mounted in the cab. Anybody can help I'd appreciate it.
<TABLE border=0 cellSpacing=0 cellPadding=0 itxtHarvested="0" itxtNodeId="29"><TBODY itxtHarvested="0" itxtNodeId="30"><TR itxtHarvested="0" itxtNodeId="33"><TD bgColor=#dfdfdf colSpan=2 itxtHarvested="0" itxtNodeId="44">Description: </TD></TR><TR itxtHarvested="0" itxtNodeId="32"><TD bg*************** colSpan=2 align=middle itxtHarvested="0" itxtNodeId="46">
</TD></TR></TBODY></TABLE>

 

If I remember correctly these were quite the rage back when, advertised as saving fuel milage, inproved engine performance, blah, blah... Sold by JC Whitney, Charlie's, etc.

i seem to recall the name "Motor Minder". made by various brand, Stewart-Warner being one of them. Other than that I don't have much.

 

That's a big help. Thanks for your response

 

Other than looking like it is larger, and a bit gawdy, it doesnt do more or less than the Stewart Warner 2 in. vacuum gauge I use. They are a useful.