Progress ... hanging sheetmetal!!
#1819
I almost forgot this too! My friend called me the other day to let me know some company was selling photos of the Century of Progress Fire Department firemen and guess who one of the guys listed was??? I have the picture already. They have his name spelled wrong and list him as a Captain instead of a Lieutenant but it was still neat to see his picture for sale on the internet!! He is wearing the badge that I now own too!!
Link to the site ... it lists a few of the guys: If you hit the next arrow on the site you can see the other men!
Captain Kinch Of The Century Of Progress Fire Department Chicago by Retro Images Archive - Captain Kinch Of The Century Of Progress Fire Department Chicago Photograph - Captain Kinch Of The Century Of Progress Fire Department Chicago Fine Art Prints
Link to the site ... it lists a few of the guys: If you hit the next arrow on the site you can see the other men!
Captain Kinch Of The Century Of Progress Fire Department Chicago by Retro Images Archive - Captain Kinch Of The Century Of Progress Fire Department Chicago Photograph - Captain Kinch Of The Century Of Progress Fire Department Chicago Fine Art Prints
#1822
#1825
A little update! Found some time to work on the roof ladder I have for the truck. I need 2 and was given one a while back. Its in poor condition and I hope to replace it when I find another one. I bead blasted the hooks and gave them a coat of fresh paint. The ladder just got a coat of varnish. Now comes the tricky part! How did they mount it! I don't have a real good picture of how they did it. As you can see from the pics below there was some type of bar they kept the ladder from sliding out. I will assume it hinges on the top?? Could there of been some sort of railing on the floor that the ladder slid into to keep it from moving around. When we took the truck apart the ladder floor had already been removed so I don't know the original configuration. Does anyone have any suggestions? They would be greatly appreciated!
There was another ladder on eBay not long ago but it was a little pricy and the man was in California and would not ship it. Here is the link:
http://www.ebay.com/itm/281403674438?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I started another book. I know the second one hasn't been printed yet! It is on the Century of Progress Fire Department ...same one that I was able to get my grandfather's badges. In my first book on the Patrol, I included a chapter about the department. I want to expand the chapter and add additional information like the log book and other pictures that I didn't use.
There was another ladder on eBay not long ago but it was a little pricy and the man was in California and would not ship it. Here is the link:
http://www.ebay.com/itm/281403674438?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I started another book. I know the second one hasn't been printed yet! It is on the Century of Progress Fire Department ...same one that I was able to get my grandfather's badges. In my first book on the Patrol, I included a chapter about the department. I want to expand the chapter and add additional information like the log book and other pictures that I didn't use.
#1827
Have you fit the ladder in there? I would bet they didn't worry too much about it banging side to side. The locking rod looks to be spring loaded on the bottom. I was thinking that maybe there was a hole at the top and bottom and the spring kept it in place. But I would bet it attached at the top. It would be too easy to lose the piece at a fire if it wasn't attached.
How long have you had that top picture? Seeing the rails reminded me of the discussions we had on yours being bent. I know at one time you pondered whether you should leave them bent or straighten them.
How long have you had that top picture? Seeing the rails reminded me of the discussions we had on yours being bent. I know at one time you pondered whether you should leave them bent or straighten them.
#1829
Keith, I know your truck is a historical representation, but for what it's worth, let me share the following info with you. My father was a commercial roofer (worked primarily on commercial bldgs) in Buffalo NY for 40 years. In NYS at least it was illegal to paint or varnish a wood ladder in commercial use. This law my father told me was because any finish could easily hide a hairline crack, and the finish would "burn" (blister) their hands from friction in use. He was quite adept at doing the "fireman's slide" as he called it where he would slide down the ladder by holding the outside of the side rails and pressing his feet against them to control his speed. This would have been impossible to do if the ladder had any type of finish applied. The blistering issue was also the reason no finish was applied to wood tool handles. I remember a couple times when he bought a new hammer or hatchet and scraped all the finish off the handle with a piece of broken glass.
I would think the same rule would apply (?) to wood fire ladders, pike and axe handles etc., especially since the varnish of the day would soften and get sticky/melt at fairly low temperatures, and is flammable. If this was the case with fire ladders, and you left yours unfinished it might be an interesting talking point when showing the engine off?
I would think the same rule would apply (?) to wood fire ladders, pike and axe handles etc., especially since the varnish of the day would soften and get sticky/melt at fairly low temperatures, and is flammable. If this was the case with fire ladders, and you left yours unfinished it might be an interesting talking point when showing the engine off?
#1830
Exactly what Chuck said in PL 1829 just above. I've heard this said, not as the law but as common knowledge to be put forward. But, I doubt if your ladders ever get used. And Keith, a reproduction ladder would not be that hard to duplicate, complete with age / usage marks. Hooks may be a bit more difficult to fabricate.