Is this a 2wd or 4wd auto C6? Will it bolt up to a 68 390? I ran the id tag. It came out of 76 F150/350 390 engine truck. Will

PGB BN4 B19
D5TP TA 102364

 

Nobody has a answer

 

The numbers don't do diddly squat.
Check them again.

How long is the extension housing?
There are 4 different output shafts.

 

2wd tailshaft:

P92432 Image Large Photo 23

4x4:

Ford C6 Transmission And Transfer Case - Great Lakes 4x4. The largest offroad forum in the Midwest

Not sure how long these links are good for. There are some variations, for example a C6 for a 4x4 with a divorced TC will look similar to the 2wd but be shorter, if what I've seen is correct.

 

You dont know what ur talking about.

I was able to cross reference them to a F150-350 1976 390 truck (PGB BN4).

 

The casing is all one piece. The tail is a spline shaft not a yoke.

 

D5TP TA 102364
This says 75, where did you get 76?

Ford C6 transmission

I do not see PGB BN4 listed here.

 

Because this is a truck C6 auto not a car C6 auto.

I got mine here.

1973-1979 Ford Truck/Van Automatic Transmission Application Chart - FORDification.net

 

Ok.

"F150/350 — 8 tooth speedo. drive gear"

The 8 tooth speedo says 2WD transmission.

 

Ok. Didnt know what 8 tooth speedo gear meant in reference to being a 2wd or 4wd.

Thanks

 

4WD does not have a captive speedo gear.

2WD with a long output shaft have the speedo cut into the shaft.