When i turn there is a grinding noise on the driver side and sometimes makes a thud or popping sound. Any ideas thanks

 

Could be tire rub or wheel bearings or many other things. Jack the front axle up and try to wiggle the wheel left and right and up and down, Put your hand in the 12 and 6 o'clock position an try to wiggle the wheel and then in the 3 and 9 o'clock position.

 

Oh, and welcome to FTE!!!!!!

 

More info on your truck will help to.

 

Does it sound like metal on metal or something else. Is it lifted with bigger tires that are rubing on the springs or bumper?

 

could be loose fender bolts.

 

Yep, these ...
Don't laugh to much until you try it.
They might be snug so tighten them up another turn or so.

 

If it's 4x4 it may be the ujoint in the axle

 

O yeah sure sorry kinda new to this so its a F250 7.3L Turbo 2WD 1997 with almost 20,000 miles on it with no lift its a work truck.There isnt any rubbing or anything To my knowing. I took off the tire look and then looked with the tired on. I know this was kinda stupid of me wasnt thinking cuz i felt so unstopable in this ford truck >.< but i hopped a curb not very fast but shouldve been more carefull.

 

O thanks for the welcome

 

20,000 miles, total??

 

I'm thinking he forgot a 0 Glenn. Although, 20k sure would be nice!

 

Oops 200,000 total on the truck sorry

 

Ya, I was going to say 'that's amazing'!