1999 to 2016 Super Duty 1999 to 2016 Ford F250, F350, F450 and F550 Super Duty with diesel V8 and gas V8 and V10 engines
Sponsored by:
Sponsored by:

'11 exhaust fitting?

Thread Tools
 
Search this Thread
 
  #1  
Old 03-03-2011, 07:07 PM
Menghi08LT's Avatar
Menghi08LT
Menghi08LT is offline
Tuned
Thread Starter
Join Date: Feb 2011
Posts: 264
Likes: 0
Received 0 Likes on 0 Posts
'11 exhaust fitting?

I've done a lot of research on this topic and can't draw a conclusion. I'm going to assume this applies to '10 and earlier models with the V10 engines as one of the exhausts matches that fitting.

I just picked up a 2011 F250, 6.2 V8 and it's a regular cab/8ft box, 137" wheelbase. I had a Magnaflow exhaust on my previous truck, a 5.4, but have not found any that would fit for this truck yet, minus the crew cab. Corsa and Gibson both make an exhaust they say fits extended and crew cabs starting with the Ext./short bed configs. It's a longer wheelbase. Banks' website lists this as the same exhaust for the V10 model, so I've even looked into that.

I contacted Corsa, Gibson, and Magnaflow about their exhausts listing specific part numbers and my problem. Gibson was the only one to respond, and it's been a week now. I was told in the email that in the past they would work together, but he cannot guarantee that it'll fit on my truck if I order one of the two that I would like, both of which are listed for ex/crew cabs. I was told to call my dealership and compare part numbers for OEM exhausts and if they match it should fit.

What I want to know is, are ext cab and crew cabs close or the same as the regular cabs? I have the extra money now for an exhaust and this truck is just itching for one!

Thanks guys!
 
  #2  
Old 03-03-2011, 07:22 PM
bangin nails's Avatar
bangin nails
bangin nails is offline
New User
Join Date: Dec 2010
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
I know on my 06 350 all were the same part # the difference in cab le ngths is made up by the factory mid pipe
 
  #3  
Old 03-03-2011, 09:04 PM
KOESTNER's Avatar
KOESTNER
KOESTNER is offline
FTE Legend
Join Date: Apr 2010
Location: Peoria, Illinois
Posts: 127,357
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by Menghi08LT
I've done a lot of research on this topic and can't draw a conclusion. I'm going to assume this applies to '10 and earlier models with the V10 engines as one of the exhausts matches that fitting.

I just picked up a 2011 F250, 6.2 V8 and it's a regular cab/8ft box, 137" wheelbase. I had a Magnaflow exhaust on my previous truck, a 5.4, but have not found any that would fit for this truck yet, minus the crew cab. Corsa and Gibson both make an exhaust they say fits extended and crew cabs starting with the Ext./short bed configs. It's a longer wheelbase. Banks' website lists this as the same exhaust for the V10 model, so I've even looked into that.

I contacted Corsa, Gibson, and Magnaflow about their exhausts listing specific part numbers and my problem. Gibson was the only one to respond, and it's been a week now. I was told in the email that in the past they would work together, but he cannot guarantee that it'll fit on my truck if I order one of the two that I would like, both of which are listed for ex/crew cabs. I was told to call my dealership and compare part numbers for OEM exhausts and if they match it should fit.

What I want to know is, are ext cab and crew cabs close or the same as the regular cabs? I have the extra money now for an exhaust and this truck is just itching for one!

Thanks guys!
Change just the muffler with the same length,inlet and outlet location, and pipe diameter, the system is already stainless steel.
 
  #4  
Old 03-05-2011, 09:01 AM
RZAR's Avatar
RZAR
RZAR is offline
Tuned
Join Date: Oct 2010
Location: California
Posts: 258
Likes: 0
Received 0 Likes on 0 Posts
I have a Regular cab also. The exhaust is different from the SC and CC's. On our RC's their is one less resonator (a very Small one) than the SC and CC's.
 
  #5  
Old 03-05-2011, 10:11 AM
bangin nails's Avatar
bangin nails
bangin nails is offline
New User
Join Date: Dec 2010
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
rzar I dont think i have a resonator on my o6 ,mine has a cat on each down tube of the y pipe is yours a different set up?
 
  #6  
Old 03-05-2011, 11:10 AM
RZAR's Avatar
RZAR
RZAR is offline
Tuned
Join Date: Oct 2010
Location: California
Posts: 258
Likes: 0
Received 0 Likes on 0 Posts
Mine is a 2011 so it probably is
 
  #7  
Old 03-05-2011, 11:20 AM
bangin nails's Avatar
bangin nails
bangin nails is offline
New User
Join Date: Dec 2010
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
rzar not 2 jack this thread what do you think of the 6.2 I wouldnt call my 5.4 fast but in a pinch I pulled our kobota k 161 3 excavator and was surpised how well it did seeing as I have 3.73 gears so I can imagine that the 6.2 must be awsome!
 
  #8  
Old 03-05-2011, 11:25 PM
RZAR's Avatar
RZAR
RZAR is offline
Tuned
Join Date: Oct 2010
Location: California
Posts: 258
Likes: 0
Received 0 Likes on 0 Posts
Mine has the 6.2 with 4.30's and it moves! I only have 2000 miles on it. havent had the chance to really hual anythig heavy.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cash188
2009 - 2014 F150
17
03-14-2010 09:37 PM
V10man
Modular V10 (6.8l)
1
01-28-2006 07:23 AM
FTE Trigger
2004 - 2008 F150
14
08-05-2005 11:18 PM
98Cobra
2004 - 2008 F150
11
01-03-2005 04:54 PM



Quick Reply: '11 exhaust fitting?



All times are GMT -5. The time now is 01:05 AM.