My IPR MALE plugin needs replaced. Ford says they cant get 1, any ideas where i might find 1.

 

I'll make some phone calls today. Can't promise anything, but will try.

 

The male plug for the IPR is also the same as the EBPV solenoid and injector plug.

 

I checked with my ford parts man today and he looked it up. They've got a new system now and it's pretty confusing. We weren't able to see one but he said he would call ford and should be able to figure out what it is. I have to check back with him tomorrow afternoon.

 

I found this on another forum. International number; 2501107C1. I haven't verified this, but you could at international.

 

There is a guy who sells these on ebay, not cheap, but it's the only place I know of to get it. Heres a link that should work, it appears he raised the price because it was like 25 when I bought it a few months ago.

Ford Diesel 6.0 & 7.3 IPR REGULATOR WIRE REPAIR KIT - eBay (item 190456551721 end time Feb-11-11 06:48:22 PST)

 

PM plgebbia he should be able to fix you up. He did me

 

The guys on the other truck forum said it was about $20 at international.
I would check with them first. I did get a part # from Ford; F81Z-9D930-AB-ASY. That's the under valve cover harness assembly for the injectors. It cost $93 plus tax here in the states, from ford.

If international doesn't work out, I'd go with ebay if it checks out.

You should be able to get one with the info you've got now.

 

Go to International....It will be way cheaper. I needed a CPS pigtail and got it from them for 9 bucks a year ago. Stay away from the ford dealer, they'll just rip you off.