When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Need to remove the fan clutch on a 94 Exploder, and a 1-1/8 Craftsman (my biggest wrench) is a bit too small. Yeah, I know there's a special tool, but if I get a combination wrench and a strap wrench I'm sure I'll use it for more than just this one job.
Try taking 2 hammers and hitting the nut simutaniously with both hammers, one on each side of the nut. I have taken a few off and hitting them like that they usually will spin off by hand after a few wacks.