2.3 cylinder head
#1
2.3 cylinder head
I recently cracked my head on my 94 ranger. I found anouther one but it has some differences. I noticed that the valve springs are a smaller diameter on the new one. the rockers and lobes on the cam seem to have a smaller width. there is also no water jacket on the intake side as where was on my old head. Now the water jacket isn't a beg deal to me cause the stock intake manifold doesn't have a matching jacket so basically the water gets head off. What is this head possible off? what do you think. I am not at the house otherwise i would give casting numbers.
steven
steven
#2
Thread
Thread Starter
Forum
Replies
Last Post
Bulldog187th
1973 - 1979 F-100 & Larger F-Series Trucks
11
07-06-2016 09:29 PM
427 fordman
1999 to 2016 Super Duty
12
12-22-2014 12:28 PM
atomicjoe23
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
17
05-08-2014 06:38 PM