Wish List
#31
Ok so i have waaaaayyyyyyy to much time on my hands with this 4 day weekend i have and got bored so i made up a wish list of all the stuff i want to put onto the truck. its kinda long and dumb but i was wondering if i missed anything or maybe somebody might find this stupid list usefull haha. i do have one part not on this list that i already bought, the 4 pod pillar from complete performance parts. jst waiting on guages to use it.
· Protech tool box- $400
· Protech Mesh Headache Rack- $300
· PHP Phoenix Chip - $375
o Stock
o 65 HP Moderate Tow
o 65 HP Daily Driver
o 80 HP Performance
o 140 HP Extreme
o Smoke Show
· 315 Dick Cepek Tires- $1200 Mud Country's are $1000 from tire rack
· 16X10 Ultra 164 Rims- $450
· 16.5ti Warn winch- $1542.70 Do you need a 16.5? Maybe an M15000 or M12000?
· Winch Ready Fleet Bumper- $2200 There are cheaper bumpers that look better IMO..
· 5 inch Tymar Straight Pipe- $450
· 8 inch Exhaust Tip Diesel Performance Plus (DPP) - $125
· Dee Zee Bed Rails- $100
· WoloPA Speaker- $153
· Train Horns (Horn Blasters) - $350
· 4 PIAA 510 lights (2 driving lights, 2 fog lights) winch bumper- $357.5
· 4 KC lights (middle cab rack) - $240.66
· 2 fog lights (sides of cab rack) - $132.22
· 2 fog lights (rear bumper) - $90
·D66 turbo- $1125 Are you sure your stock turbo won't do the job? It's fine with stage 1's
·Ladder bars- $360 Build these yourself if you can weld. See Tech info links thread
·Halo projector headlights-$200
·5k HID kit-$150
·Mag-Hytec rear diff cover-$247
·Mag-Hytec tranny pan- $320 Not needed..
·Terminator 17*/ or modded 17* HPOP- $300-$600 Can be had cheaper than $300 if you find a good 17* for around $150
·Lund Visor II -$250
·Cab lights-$40
·Rear sliding window-$75
·Decals
·Isspro gauges (pyro, tranny temp, boost, fuel press, parts) - $524.24 RiffRaff huh? LOL
·Rowdy Racks mud Flaps (chrome “Fear This”) -$280
·HPX oil line-$65
·RacerX torque Converter-$750
·RacerX Tranny valve body-$138
·Under Hood LED lights-$18
·tailgate LED light bar-$39
·Chrome rocker panels- $180
·XLT side trim- $100
·Door pockets-
·Fuel Bowl Heater Rod and element- $67.64 These parts are not needed
·LED third brake light- $81
·Intercooler-$400 Parts can be had for $200 or less. DIY.
·140 IDM mod
·FPR Shim- free
·Oil Cooler O-rings/gasket kit-$60
·RiffRaff turbo intake pipe-$50
·2 Optima Yellow Top D27F batteries- $370.26
·LED running board lights-$109
·Cowl or GT 500 hood- $689 $539 here-- https://www.cervinis.com/product.aspx?car=1&id=1125#113
·Hi-Lift Jack X-Treme 60”- $100
·Stage One Rosewood Premium Rebuilt Injectors- $1,235 $885 for stage 2's
·Rear Auburn Pro Series Limited Slip- $526.89<O</O
TOTAL= $17,516.11 $13503.47 if you look around, find the deals, and take out some possible unneccessary parts.
· Protech tool box- $400
· Protech Mesh Headache Rack- $300
· PHP Phoenix Chip - $375
o Stock
o 65 HP Moderate Tow
o 65 HP Daily Driver
o 80 HP Performance
o 140 HP Extreme
o Smoke Show
· 315 Dick Cepek Tires- $1200 Mud Country's are $1000 from tire rack
· 16X10 Ultra 164 Rims- $450
· 16.5ti Warn winch- $1542.70 Do you need a 16.5? Maybe an M15000 or M12000?
· Winch Ready Fleet Bumper- $2200 There are cheaper bumpers that look better IMO..
· 5 inch Tymar Straight Pipe- $450
· 8 inch Exhaust Tip Diesel Performance Plus (DPP) - $125
· Dee Zee Bed Rails- $100
· WoloPA Speaker- $153
· Train Horns (Horn Blasters) - $350
· 4 PIAA 510 lights (2 driving lights, 2 fog lights) winch bumper- $357.5
· 4 KC lights (middle cab rack) - $240.66
· 2 fog lights (sides of cab rack) - $132.22
· 2 fog lights (rear bumper) - $90
·D66 turbo- $1125 Are you sure your stock turbo won't do the job? It's fine with stage 1's
·Ladder bars- $360 Build these yourself if you can weld. See Tech info links thread
·Halo projector headlights-$200
·5k HID kit-$150
·Mag-Hytec rear diff cover-$247
·Mag-Hytec tranny pan- $320 Not needed..
·Terminator 17*/ or modded 17* HPOP- $300-$600 Can be had cheaper than $300 if you find a good 17* for around $150
·Lund Visor II -$250
·Cab lights-$40
·Rear sliding window-$75
·Decals
·Isspro gauges (pyro, tranny temp, boost, fuel press, parts) - $524.24 RiffRaff huh? LOL
·Rowdy Racks mud Flaps (chrome “Fear This”) -$280
·HPX oil line-$65
·RacerX torque Converter-$750
·RacerX Tranny valve body-$138
·Under Hood LED lights-$18
·tailgate LED light bar-$39
·Chrome rocker panels- $180
·XLT side trim- $100
·Door pockets-
·Fuel Bowl Heater Rod and element- $67.64 These parts are not needed
·LED third brake light- $81
·Intercooler-$400 Parts can be had for $200 or less. DIY.
·140 IDM mod
·FPR Shim- free
·Oil Cooler O-rings/gasket kit-$60
·RiffRaff turbo intake pipe-$50
·2 Optima Yellow Top D27F batteries- $370.26
·LED running board lights-$109
·Cowl or GT 500 hood- $689 $539 here-- https://www.cervinis.com/product.aspx?car=1&id=1125#113
·Hi-Lift Jack X-Treme 60”- $100
·Stage One Rosewood Premium Rebuilt Injectors- $1,235 $885 for stage 2's
·Rear Auburn Pro Series Limited Slip- $526.89<O</O
TOTAL= $17,516.11 $13503.47 if you look around, find the deals, and take out some possible unneccessary parts.
#33
Oh there it is haha been waitin for that lol. no see i just want what everybody doesnt have or doesnt want. most guys have 4" straight pipe i want a 5". some guys have 5" or 6" tips i wanna go 8". now they make 10" and i think 12" tips but i dont think i would fit under the bed haha. No sir never driving a cumming other than the freightliners on the farm. No i just like to guy big or go home
#35
Ok, that is just a little trimming of some things. Took out the D66, changed to a slightly smaller winch, took out $1000 for a cheaper, but similar bumper, minus the brush gaurd so add $1000 if your set on that particular bumper. Found a cheaper cowl hood that I have experience with and know it's a nice piece. Took out the tranny pan. It's not needed, but can be had for really cheap used.
#36
yea i have looked at buckstop and they have some nice bumpers but they just arent for me. that winch ready is the one i gotta have lol cheapers not an issue when your spending your student loans on it anyways haha jk no not gunna do that lol but i want to
#37
The grill guard on that "Fleet" bumper just seems really obnoxious, but some people are into that kind of thing. I kinda like the new bumpers that Complete Performance has and I like the Broncoair bumpers also. The Bronco air bumpers are too expensive for me and they are around $1000 less than the one your looking at. Thats just too much for a bumper that is made of 3/16's plate IMO. The plate doesn't cost even a fraction of that...
#38
The grill guard on that "Fleet" bumper just seems really obnoxious, but some people are into that kind of thing. I kinda like the new bumpers that Complete Performance has and I like the Broncoair bumpers also. The Bronco air bumpers are too expensive for me and they are around $1000 less than the one your looking at. Thats just too much for a bumper that is made of 3/16's plate IMO. The plate doesn't cost even a fraction of that...
Thread
Thread Starter
Forum
Replies
Last Post
ten.mile
6.0L Power Stroke Diesel
4
05-16-2020 04:34 PM