ABS Gaurd for the easily broken abs sensor
#1
ABS Gaurd for the easily broken abs sensor
Hey everyone.
One of the major issues that we are seeing from customers are the rear abs sensor's snapping. They are located on the front side of the axel and seem to be catching rocks, debris, mud, etc. because they are unprotected they are becoming brittle and weak, or taking impacts from rocks or simply snagging stuff. So we made a simple quick fix for cheap.
These abs gaurds take about 5 min total to put on and provide protection completely around the sensor.
We also include a new Grade 10 bolts which is a big leap from the stock grade 5 bolt.
We are selling these for $50 shipped.
This includes
2 ABS gaurds, coated, tig welded, built from 120. wall dom
2 grade bolts
and shipped
The fix from Ford is $500. Our solution is abs gaurds for $50
One of the major issues that we are seeing from customers are the rear abs sensor's snapping. They are located on the front side of the axel and seem to be catching rocks, debris, mud, etc. because they are unprotected they are becoming brittle and weak, or taking impacts from rocks or simply snagging stuff. So we made a simple quick fix for cheap.
These abs gaurds take about 5 min total to put on and provide protection completely around the sensor.
We also include a new Grade 10 bolts which is a big leap from the stock grade 5 bolt.
We are selling these for $50 shipped.
This includes
2 ABS gaurds, coated, tig welded, built from 120. wall dom
2 grade bolts
and shipped
The fix from Ford is $500. Our solution is abs gaurds for $50
Thread
Thread Starter
Forum
Replies
Last Post
hewer_07
1961 - 1966 F-100 & Larger F-Series Trucks
2
08-17-2008 08:54 PM