New 71 - Page 10 - Ford Truck Enthusiasts Forums
 
Go Back   Ford Truck Enthusiasts Forums > Bronco > 1966 - 1977 Early Broncos
Sign In
Register Forgot Password?


1966 - 1977 Early Broncos SPONSORED BY:

New 71

Reply
 
 
 
 
LinkBack Thread Tools Search this Thread
  #136  
Old 02-15-2015, 04:02 PM
77&79F250's Avatar
77&79F250 77&79F250 is online now
The parts guy...
 
Join Date: Feb 2007
Location: S/W Missouri
Posts: 18,636
77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of
This thing barely ran on a test lap in the field, I wanted to make sure the thing had oil pressure, the trans shifted and the xfer case worked.

It died right at the end of me seeing what I needed. We ended up loading it on my trailer with a backhoe.....then the fun began. I had to figure out what the PO did, then talked to the PPO and got even more info on it.

It rough, but its a fun rig. I do not cringe when I bump something, I just hit the skinny pedal. It climbs like a mountain goat on crack! lol
__________________
77&79 F250 Rich & Penny
77 351M auto, a/c, add a leaf 33x12.50's
78 (79 headlights) 460 4 spd, 4", a/c and 35's
79 351M 4spd 6" Skyjacker Edelbrock-Holley-Hedman 35's
99 Ranger 4x4, 98 Expedition 4x4, 73 Bronco Hillbilly-Bug
71 Bronco 302 35" Boggers 5.58 gears spool/locker
Reply With Quote
  #137  
Old 04-22-2015, 10:57 PM
77&79F250's Avatar
77&79F250 77&79F250 is online now
The parts guy...
 
Join Date: Feb 2007
Location: S/W Missouri
Posts: 18,636
77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of
Not much new here, but I finally located a glove box door, not original to this Bronco so it had the old VI plate to the doner.

After the hinge mod it will now open even with a roll bar and not have to be cut.

Some times its the little things in life that are nice....like to not have things fly out the glove box.

I had to trim off a little more of the one side of the hinge left over and just used a coat hanger as the complete hinge rod. I did not cut the R/H side hinge only piece like in the diagram.

Pop it open a bit, slide it left to clear the roll bar, wala.
Attached Images
    
__________________
77&79 F250 Rich & Penny
77 351M auto, a/c, add a leaf 33x12.50's
78 (79 headlights) 460 4 spd, 4", a/c and 35's
79 351M 4spd 6" Skyjacker Edelbrock-Holley-Hedman 35's
99 Ranger 4x4, 98 Expedition 4x4, 73 Bronco Hillbilly-Bug
71 Bronco 302 35" Boggers 5.58 gears spool/locker
Reply With Quote
  #138  
Old 04-23-2015, 10:34 PM
77&79F250's Avatar
77&79F250 77&79F250 is online now
The parts guy...
 
Join Date: Feb 2007
Location: S/W Missouri
Posts: 18,636
77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of
Sorry I forgot to take a pic of the amount I cut off, red box is according to the diagram, I did the green box to get it to slide even further.

In the diagram it shows to cut off a small piece of the bottom tab. I cut complete tab off on the bottom of the dash and did not cut the "right hinge only".

And ditch the springs and use a coat hanger for the rod from outer edge to outer edge.
Attached Images
 
__________________
77&79 F250 Rich & Penny
77 351M auto, a/c, add a leaf 33x12.50's
78 (79 headlights) 460 4 spd, 4", a/c and 35's
79 351M 4spd 6" Skyjacker Edelbrock-Holley-Hedman 35's
99 Ranger 4x4, 98 Expedition 4x4, 73 Bronco Hillbilly-Bug
71 Bronco 302 35" Boggers 5.58 gears spool/locker
Reply With Quote
  #139  
Old 05-07-2015, 02:33 PM
chrlsful's Avatar
chrlsful chrlsful is offline
Postmaster
 
Join Date: Nov 2009
Location: Lawrence Swamp
Posts: 2,926
chrlsful has a good reputation on FTE.chrlsful has a good reputation on FTE.chrlsful has a good reputation on FTE.
No tag left on the rear end?
If you find the right numbers cast into it those can be used to ID what U have...
__________________
Chad
'70 LUEB 1/2 cab, '77 frame ie: PS, trapezoidal BB 9", w/411; "T" D20/PTO; 250cid mid-swap; 2"SL; WH 1" BL; 4 discs; 3.03/3 sp Hurst. Seeking: Carter RBS, hydraulic Gear Motor for Koenig pto, '2 wd' zf E-Brake, 3'X10" Auger.
chrlsful@aol.com, 413 259-1749
Reply With Quote
  #140  
Old 05-07-2015, 04:55 PM
77&79F250's Avatar
77&79F250 77&79F250 is online now
The parts guy...
 
Join Date: Feb 2007
Location: S/W Missouri
Posts: 18,636
77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of77&79F250 has much to be proud of
What tag? The axle ID tag? I hear that the vin is on the r/h frame rail by the front shock tower? Confirm?

The red 71 body does have the white Safety Standard Certification Label was introduced in 1970. It was glued to the B pillar (door post) below the striker plate on trucks and above the door striker on EB's.
__________________
77&79 F250 Rich & Penny
77 351M auto, a/c, add a leaf 33x12.50's
78 (79 headlights) 460 4 spd, 4", a/c and 35's
79 351M 4spd 6" Skyjacker Edelbrock-Holley-Hedman 35's
99 Ranger 4x4, 98 Expedition 4x4, 73 Bronco Hillbilly-Bug
71 Bronco 302 35" Boggers 5.58 gears spool/locker
Reply With Quote
Old 05-07-2015, 04:55 PM
 
 
 
Reply


Similar Threads
Thread Thread Starter Forum Replies Last Post
selector valve for fuel tanks spaytons 1987 - 1996 F150 & Larger F-Series Trucks 10 03-14-2014 08:24 AM
Buying New Gas Tank - Evaporative Emissions Control... say what? Aaron-71 1973 - 1979 F-100 & Larger F-Series Trucks 38 08-10-2013 09:42 PM
Aux fuel tank sending unit sparkyj 1961 - 1966 F-100 & Larger F-Series Trucks 10 05-26-2012 08:20 AM
89 F150 4x4 Dual Fuel Tank Switch predaina 1987 - 1996 F150 & Larger F-Series Trucks 29 03-29-2011 07:07 PM
1972 Ford F-100 Ranger Truck gas tank(s)? Zelhusker 1967 - 1972 F-100 & Larger F-Series Trucks 13 11-20-2007 03:20 AM


Go Back   Ford Truck Enthusiasts Forums > Bronco > 1966 - 1977 Early Broncos

Tags
71, 71ford, 72, 77, broncofix, broncon, f100, fenders, ford, glass, idle, lexan, sale, truck, winshield

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump



All times are GMT -5. The time now is 12:40 PM.

 

Powered by vBulletin® Version 3.8.7 AC2
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Use - Privacy Statement - Terms of Service - Jobs
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.

vbulletin Admin Backup