Category: Accessories
Price: $0
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): S2000
Engine: Part suitable for gas truck, Part suitable for diesel truck

I am looking to do a ZF5 conversion to my truck. I have the transmission, flywheel, Master cylinder and slave cylinder. I am looking for the clutch/brake pedal assembly out of a 1992-'96 F-series pick up.

I also need the hydraulic line that goes from the master cylinder to the slave cylinder.

If you have these, please pm me with a price plus shipping to 89830 via UPS or USPS. FedEx and DHL do not ship to this area. I also need to know how you would like to be paid. I can (and prefer to) pay via PayPal.

Thank you.

 

How does this differ from an '89?

 

The hydraulic hose will interchange if it is off a truck with the external slave cylinder. The pedal assembly for the '89 is a large aluminum piece and the '92-'96 piece is a smaller piece made of sheet metal. I have tried one out of an '89 and there is no way to fit it in without major modification to the dash.

 

OIC....
Well, I have the master--->slave, complete w/ hose still assembled from a 460. (external slave)
I can get a pic when the sun comes up, they're out in the garage.

 

P.S., don't forget to do the firewall reinforcement for the clutch master.
I have that (small) plate too.
These are all parts I removed from my ZF donor truck.

 

The whole hydraulic set up including the reinforcing plate should fit into a medium to large post office package. How much for the whole set up sent to 89830? And how do you prefer to be paid for it?

 

I'll see in the AM if I can get it into an 11x8x5 flat rate box ($10.70)
or need the 12x12x5 ($14.50)

PayPal is fine.

 

OK. When you find out pm me with your PayPal email address and the total cost.

 

Jeff,
We are snowed in around here, I will get to the Post Office as soon as the roads are clear.
Can you PM me your address?