Remote start problems
#1
Remote start problems
Hello there. First time poster. I've seen this issue addressed before but not exactly with my problem. Had a remote start installed by local Ford dealership on my 2009 Expedition. It's the Bronze remote start, kit # 19G364 and 19G365
It was working fine, and then one day it wouldn't start. Pressing the button until it honks, goes to turn on, then it honks 6 times and simply doesn't turn on. Any ideas out there?
It was working fine, and then one day it wouldn't start. Pressing the button until it honks, goes to turn on, then it honks 6 times and simply doesn't turn on. Any ideas out there?
#2
Remote start problems
Hi,
I have a 08 expedition W/remote start and my wife told me it was doing the same thing.
It is in Valet Mode.
The manual says to enter/exit valet mode have the key in the ignition and press the button labled 2. The system Honks to acknowledge the change.
I turned her key-fob away from the other keys and it seams to have stopped the unintentional valet activation.
Hope this helps,
I have a 08 expedition W/remote start and my wife told me it was doing the same thing.
It is in Valet Mode.
The manual says to enter/exit valet mode have the key in the ignition and press the button labled 2. The system Honks to acknowledge the change.
I turned her key-fob away from the other keys and it seams to have stopped the unintentional valet activation.
Hope this helps,
#3
#4
Just found this site today, with free registration you gain access to the manuals for the Ford Alarm systems.
Code Systems Tech Services
Code Systems Tech Services
Thread
Thread Starter
Forum
Replies
Last Post
JRD761
6.7L Power Stroke Diesel
11
09-26-2016 08:57 PM