Category: Accessories
Price: $125
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): '92+ Civic/EL & Del Sol, '06+ Civic/CSX, Prelude
Item Condition: AZ
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck

Good Day, Reproduction Ranger seat brackets are offered for sale at a very affordable price...almost half the cost of others offering them.

Laser cut and Professionally made in Tucson.

the brackets will allow you to install early mustang bucket seats in your 65-66 f100-250 and will work on the 67-72 f100-250, 73-79 f100-250 trucks as well. the floor pan is the same through all these years of trucks.

i would think you could use other bucket seats from maybe a comet or falcon as the early mustang was built off of that platform. but you would need to do some measuring to make sure!

the brackets are 125.00 + shipping cost. i will ship anywere in the USA and may be able to ship to other countrys as well.

I am set up to accept paypal. cashiers checks accepted, personal checks will need to clear before i ship for obvious reasons.

Please PM me if you would like a set of them. Thank You.

 

Only 6 more sets left!

 

Bttt, 5 sets left.

 

Bttt....

4 more sets left!!!

 

I have 3 sets left to sell.

 

2 sets left....

 

Okay, now i have 2 sets left for sale.... i must have miscounted at some point.

 

Sold out for now.... i have some more on order, and i have the shop working on the correct brackets for the 67-72 trucks.

Thanks All!

 

I am interested in purchasing a set of seat brackets you have offered here. Please email me with the paypal instructions to complete the transaction
goodxs66@yahoo.com
Thanks looking forward to doing business with you Jim stone

 

E-mail me when u have some for the 67-72 trucks?

rlucas@cherokee.org

Thanks,
Richard

 

Hi Richard, i should have them any day now... will let you know as soon as they come in.
Thanks.

 

Jim, your brackets were sent out today.

Thank you.

 

new shipment of brackets are in! 65-66 brackets and 67-72 brackets are in stock

5 sets of each available

67-72 brackets are $140.00 a set + shipping

65-66 brackets are $130.00 a set + shipping

Thanks.

 

Hey bill got the brackets they look great, would like to know if there is a certain way to install them I know which one is rt and left but is there a certain way they mount to the floor do you have any pictures of these. Also did you have any problems with the seat slides not wanting to rest on them flush, did you drill holes where the rivits are would appreiate some more instructions if you have some. thank you jim stone

 

Hi Jim, i thought about drilling a hole for the rivits... but insted used a couple of washers to space the track up off the bracket. outter bracket's mount with the original bolts... inner brackets will need a fender washer on the back bolt (under the truck) I installed the outter brackets first and then used a 4ft strait edge to align the inner bracket location across the front set of mounting holes, a C clamp or someone to hold one end is a good idea. I will take some pic's of how i installed them in my truck and post them up.