You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I ordered from clay a couple weeks ago and got in my AutoEnginuity ford enhanced tool for the 7.3 00 diesel i got well when my wife had problems yesterday i could not get it to read the truck.. i dont know what im doing wrong, but it sensed the vehicle but asked me for the maek and such as it couldnt get the vin or anything like that.
I was all excited thinking I was going to get to use it to trouble shoot.
it was very drustrating, because i was trying to look for crank rpm to see if the CPS was bad..
can someone help em figure out how to use this please?
__________________ -=Skip=- 2000 Excursion limited 4x4 7.3 4R100 oil and filter 203300 miles air filter 196000 fuel filter 4/14/2013 212221 Miles alternator 1/30/2012 199226 miles. Lifetime member of theSemper FIcountry club.
A.E will not find the VIN on your truck. that feature is for the newer trucks. you have to enter the truck and engine info manually. you also need to activate the ford bundle with A.E. before it will work. the blue paper that came in the box with the paperwork explains how to activate it.
ands try to be patient, cause it takes time to figure out. i have had mine for about a year now, and am still learning things about A.E. and how to use it.
JOIN THE NEW JERSEY CHAPTER CLICK HERE
owner of almost too many fords.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.