It's Dead In Here...
#31
Why thank you! It's changed a little since I've taken that pic. (The day I bought it)
In fact I got a little list going of what I've done:
-New fuel pump
-New fuel filters - put one of those in-line clear ones on
-new radiator
-new hermostat
-new upper/Lower rad hoses
-new heater core
-new to me heater control
-bolted down the steering column and seats
-stripped/primed/painted wheels
-new spark plugs/wires/cap/rotor
-tuned her up
-starter solenoid
-voltage regulator
-changed motor/trans/tcase/both diff oils
-flushed the cooling system
-fixed vacuum leaks
-rebuilt the carb
-redid the exhaust (new headpipe and everything else back)
-got some mirrors
-stripped/primed inside of bed
and I still need to:
-get a new MC
-completely redo the rear brakes - I'm talking drums, wheel studs, pads, hardware, wheel cylinders and while I'm back there new rear bearings
-put new front axle shaft U-joints on there and replace those bearings too
-get a new crap-free tank
-find a tailgate
-put on my gauges: tach and 3 gauge cluster of oil pres./temp/volts
-find a new rear bumper
-fix whatever else decides to break
In fact I got a little list going of what I've done:
-New fuel pump
-New fuel filters - put one of those in-line clear ones on
-new radiator
-new hermostat
-new upper/Lower rad hoses
-new heater core
-new to me heater control
-bolted down the steering column and seats
-stripped/primed/painted wheels
-new spark plugs/wires/cap/rotor
-tuned her up
-starter solenoid
-voltage regulator
-changed motor/trans/tcase/both diff oils
-flushed the cooling system
-fixed vacuum leaks
-rebuilt the carb
-redid the exhaust (new headpipe and everything else back)
-got some mirrors
-stripped/primed inside of bed
and I still need to:
-get a new MC
-completely redo the rear brakes - I'm talking drums, wheel studs, pads, hardware, wheel cylinders and while I'm back there new rear bearings
-put new front axle shaft U-joints on there and replace those bearings too
-get a new crap-free tank
-find a tailgate
-put on my gauges: tach and 3 gauge cluster of oil pres./temp/volts
-find a new rear bumper
-fix whatever else decides to break
#33
#36
#37
#44
hello, just joined the forum here...new on here but not new to Ford trucks...the 01 black truck(really miss this one) is one of my former truck before I bought the 06 silver one... I'm in the Fox Lake area and I collect Datsuns as well...the silver truck is my daily driver...and the blue car is my 76 280z custom
#45
Welcome to FTE and the Illinois Chapter! You have some very nice looking vehicles. I'm a sucker for Japanese cars as well...
Here's my '87 Nissan Pulsar NX SE with the 1.6L DOHC motor that I sold last year.
I don't own a single import anymore, but I've owned seven 1gA/B Eagle Talons/Mitsu Eclipses, a '88 Nissan Pulsar NX SOHC, a '91 Geo Storm GSi, a '90 Toyota Celica GT-S widebody, and a '01 Honda Accord. I'd like to pick up a Mitsu Starion at some point in my life... oh, er.... Ford trucks rule!
Here's my '87 Nissan Pulsar NX SE with the 1.6L DOHC motor that I sold last year.
I don't own a single import anymore, but I've owned seven 1gA/B Eagle Talons/Mitsu Eclipses, a '88 Nissan Pulsar NX SOHC, a '91 Geo Storm GSi, a '90 Toyota Celica GT-S widebody, and a '01 Honda Accord. I'd like to pick up a Mitsu Starion at some point in my life... oh, er.... Ford trucks rule!