1968 330MD w/Autolite 2100 Wet Float Level
#1
11-15-2010, 01:48 PM
Join Date: Nov 2002
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
#2
11-16-2010, 06:37 AM
My '79 Motor's Truck Repair manual lists the wet float levels for '68 2100's, but only by tag #. If the carb has a tag on it, it should have a # like C8TF-AA or something like that.
Report back with the tag # and I can find it for you. Otherwise, it's a crap-shoot. C8TF-Ax might be what you have, but it also might not. And even for the C8TF ones, it lists 31/64 or 17/32. C8U and C8Z are 3/8, and C8AF-M is 31/64, C8AF-(others) is 3/8.
Report back with the tag # and I can find it for you. Otherwise, it's a crap-shoot. C8TF-Ax might be what you have, but it also might not. And even for the C8TF ones, it lists 31/64 or 17/32. C8U and C8Z are 3/8, and C8AF-M is 31/64, C8AF-(others) is 3/8.
Thread
Thread Starter
Forum
Replies
Last Post
brider
1967 - 1972 F-100 & Larger F-Series Trucks
12
05-30-2016 09:03 AM
2speed
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
9
02-17-2003 05:00 PM
tbe
1967 - 1972 F-100 & Larger F-Series Trucks
10
12-01-2002 12:09 PM
