Need something to cut with
#1
Need something to cut with
I was wondering if anyone in the south sound area has a plasma cutter or oxy/acetylene torch. I have a set of ramps that I need to cut on to make them more usable for my trailer. For reference, the ramps are 2 feet wide; 10 feet long; and weigh 200+ pounds each.
I can bring them to your location if it's within a decent drive from Tacoma.
I can bring them to your location if it's within a decent drive from Tacoma.
#3
I was wondering if anyone in the south sound area has a plasma cutter or oxy/acetylene torch. I have a set of ramps that I need to cut on to make them more usable for my trailer. For reference, the ramps are 2 feet wide; 10 feet long; and weigh 200+ pounds each.
I can bring them to your location if it's within a decent drive from Tacoma.
I can bring them to your location if it's within a decent drive from Tacoma.
I know this is 6 months old,
but, did you get this taken care of?
if you wanna come up to Bremerton, I've got a guy that I'd use.
his name is Darin at m2autoworks.com - Home
great fabricator.
Thread
Thread Starter
Forum
Replies
Last Post
06RANGER
1983 - 2012 Ranger & B-Series
84
08-24-2006 07:18 PM
horsetruck
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
4
12-06-2001 10:15 AM