7.3L Powerstroke threw a rod through the block. Selling off all remaining engine parts, both aftermarket and stock parts.
Aftermarket Parts:
-BTS Dual HPOP kit -- $2000.00
-Melling LPOP -- $40.00
-AFE Stage II intake kit, with standard filter, new PG7 filter, and AFE filter cover -- $300.00
-Van Turbo, rebuild to new specs approx 20K miles ago. No abnormal shaft wear. Shaft and bushings are polished. -- $500.00
-Modified EBPV for use of the van turbo on a truck. Had van downpipe flange removed and larger truck flange welded on. Allows use of EBPV, like stock, when running a van turbo and eliminates the need for an adapter flange as well as allows you to use the stock pedistal rather than a non-EBPV pedistal. -- $50.00
Stock parts: lots of stock engine parts here
-Stock HPOP, 17* pump -- $250
-Heads -- $400
-IDM -- $150
-Power steering pump & reservoir, with pulley -- $20
-Mounting bracket for AC compressor, belt tensioner & idler pulley
-Mounting bracket for alternator & power steering pump
-Turbo pedistal, EBPV type -- $100
-Exhaust manifolds, driver's side drilled and tapped for pyrometer probe
-Coolant overflow tank / degas bottle
-UVC Gaskets
-Valve covers
-Oil filler tube
-Rockers
-Pushrods
-Flexplate
-Front Cover
-Rear Cover
-Airtex water pump
-Oil cooler, with oil filter mount/head unit, and block heater
There may be more parts that I'm forgetting. Please PM me if your interested, or for prices that aren't listed.
Registered: October 2004 Location: Monroe Center,IL. Posts: 141
Comment Date: Sat May 24, 2008
Do you have the injectors? If so what letter code? How much?
------------------------------ Randy
99.5 F350 Regency conversion kit 4x4 DRW
4.11 ratio
Stock tire size
Full 4" exhaust straight piped
cold air intake
Granatelli Motor Sports 2 stage chip with a Bully Dog outlook monitor
jtharvey Destroking it
Registered: October 2004 Location: Columbia, MO Posts: 5722
Comment Date: Sat May 24, 2008
The injectors have been sold.
------------------------------ Jeremy
2000 F-350 CCLB SRW 4x4, Dropping in a CR 5.9 .... because my Forged Rod 7.3 blew up at 430 HP!
UPDATED - 7.3 Engine Parts for sale, both performance and stock parts: FTE Classified Ad
Registered: December 2006 Location: Louisville, KY Posts: 75
Comment Date: Sat June 7, 2008
I'd like to get the 17* hpop but with fuel prices and a baby on the way I can only offer $150. Would that be enough?
------------------------------ 11/98 F-250 CCSB 4x4 , 35" DC FCII's, 16" MT classic II's, Zoodad, HPX, CCV, 6637,DP: no start, stock, 80Econ, 120Race, Wastegate rod shorten, Boost fooler, underhood fuel psi. BTS VB, 4 gauge pod: trans,boost, Banks Six Gun, pyro. 4 pass trans cooler, 08 dif cover, 181K
jtharvey Destroking it
Registered: October 2004 Location: Columbia, MO Posts: 5722
Comment Date: Sat June 7, 2008
The stock HPOP has been sold.
Here is an updated list of available parts:
Aftermarket Parts:
-Melling LPOP -- $40.00
-AFE Stage II intake kit, with standard filter, new PG7 filter, and AFE filter cover. Also has new rubber hood seal (along the top edge of the box) and a new rubber boot that connects the AFE to the stock intake tubing. This is somewhere around $600 if bought new. I'm asking $300.00, and it's in great condition.
Stock parts: lots of stock engine parts here
-Mounting bracket for AC compressor, belt tensioner & idler pulley
-Mounting bracket for alternator & power steering pump
-Turbo pedistal, EBPV type -- $100
-Exhaust manifolds, driver's side drilled and tapped for pyrometer probe
-Coolant overflow tank / degas bottle
-UVC Gaskets
-Valve covers
-Oil filler tube
-Flexplate
-Front Cover
-Rear Cover
-Airtex water pump
If I don't have a price on a part, please PM me an offer.
------------------------------ Jeremy
2000 F-350 CCLB SRW 4x4, Dropping in a CR 5.9 .... because my Forged Rod 7.3 blew up at 430 HP!
UPDATED - 7.3 Engine Parts for sale, both performance and stock parts: FTE Classified Ad
Join Our Site - Its free, quick and easy!
.... because my Forged Rod 7.3 blew up at 430 HP! 
