Category: 53-79 F-Series Interior

Old Blue: A 1966 F-100 Birthday Build


Meet “Old Blue,” 66ordie‘s 1966 Ford F-100 build. He has three goals for this build; firstly, to finish Old Blue before her fiftieth birthday in 2016. Secondly, to update the truck as best as he can with his limited knowledge of all things metal. And, thirdly, to make his late dad¬†proud. After all, this wonderful […] More »

Changing a Window 68-72

How to remove window glass on a 68-72 pickup: Thanks to User: Ford_Six In this article, I’ll show you step by step how to remove and replace the interior door panel, window glass, vent window, and window regulator from your 68-72 F-series pickup.¬† Most other pre-97 pickups are similar, but this article concentrates on the […] More »

Replacing Floor Boards In A 1953 F-100

By John Niolon   After I drug my beauty home and rolled it off the trailer I started my survey. At first glance the floorboards looked pretty sound. After I removed the seats and scrapped off the rubber mats, it looked worse than before but still not too bad. After I soda blasted the complete […] More »

1961-1966 Ford F-Series Custom Dash

  By John Thomas Here is a picture of the dash I built for my 1965 Ford. This will work on any years from 1961 thru 1966. First I took the dash apart and got out the plastic piece that will be used (it is neo angle and must be used for the new one, […] More »

1973-1979 Everlasting Steel Glove Box (67-72 similar)

By By Ron Harmsen If you have a mid 70’s Ford Truck chances are that the original pressed fiber glove box is falling apart or maybe even missing. Why pay almost twenty bucks for a new pressed fiberboard glove box when you can make an everlasting mild steel glove box to the exact standards that […] More »

  1. 1
  2. 2