Author: admin

Dana 60 Rebuild

  A shot of the shop showing the front diff up on the work stands with my ‘custom’ cut 2×4 :), cut with the diameter of the axle tube housing to better secure it on the stands when working.  Can also see rear diff partially assembled on ground.   A shot of the table after [...] More »

78 Bronco: Headlight Relay System

By Erik Marquez Here you will find a short write up on a relay system I built for my 78 Bronco. I found that I had 11.5 volts at the head lights before I built and installed this system, after installation, I now have full alternator output, or up to 14.6 volts. While this may [...] More »

  1. 1
  2. ...
  3. 436
  4. 437
  5. 438
  6. 439