Ford Truck Enthusiasts, The Internet's Leading Ford Trucks Resource, F150
 
Articles
Ford Truck Enthusiasts
Glossary   
Search  
   
Browse by Category

Articles .: Repair & Maintenance .: How to Replace Ford Super Duty Headlights

How to Replace Ford Super Duty Headlights  


Whether you're looking to install new headlights in your Ford Super Duty truck, or if you're just interested in replacing burnt out parts with new accessories, the process of installation is relatively simple and can be done at home in just a short period of time. Use the following guide to help you with each step of the process of replacing the headlights in your Ford super duty cab.

Step 1 -- Gather the Necessary Materials

The process of replacing the headlights in yoru Ford is very easy and requires only one primary tool; a set of Phillips head screwdrivers. You'll also need to buy replacement headlight bulbs. It's a good idea to change out both of the headlights in your vehicle at once, particularly if they were installed at the same time. Ask a professional or a car service company representative for advice on which headlight bulbs to purchase.

Step 2 -- Remove the Plastic Covering

The first step is to remove the plastic covering that protects the bulbs themselves. This covering is screwed onto the grille of your car. Gently unscrew the screws and keep them in a protected place for your use later on. Pull the plastic covering offf and set it aside.

Step 3 -- Remove the Existing Bulb

Take care that the car is turned off before beginning. Gently unscrew the lightbulb that is set in the headlight currently. You'll have to unscrew a few additional retaining screws in order to have full access to the bulb. Pull the bulb out until the wires connecting the base to the grille become taut. Next, gently remove the wires from the base of the bulb so that you can remove it completely.

Step 4 -- Attach the New Bulb

Place the new bulb into the headlight cavity and attach the wires to the base. Make sure to match up the colors of the wires with the headlight base so that the connection is set properly. Screw the headlight back into the socket and reattach the retaining screws. Finally, set the headlight cover back over the bulb itself and reattach the exterior screws, making sure that the cover is tight.

If you have any questions about the process of replacing the headlights on your Ford pickup truck, check in with a mechanic for additional information. Most headlights will need to be replaced every few years.


How helpful was this article to you?


Related Articles

article How to Install Ford Super Duty Halo and LED Headlights
Whether you're interested in improving the appearance or the lights on...

  4-27-2010      
article How to Replace a Ford Super Duty Battery
Any Ford truck requires replacement parts and accessories from time...

  6-21-2010      
article New 2011 Ford Super Duty Test Drive: the Event, Select Shift, Tow Gooseneck, and the 'Competition'
On March 1st I had the pleasure of joining 49 North American journalists...

  3-8-2010      
article How To Replace the Ball Joints on your Ford Super Duty
Anyone who owns a Ford Super Duty would benefit from knowing some of the...

  9-8-2011      

User Comments

Add Comment
No comments have been posted.


.: Powered by Lore 1.5.5
Ford-Trucks.com and Internet Brands, Inc. is not affiliated with the Ford Motor Company.
© 1997-2009 Internet Brands, Inc., Please see our Terms of Use / Privacy Policy