From: owner-small-list-digest ford-trucks.com (small-list-digest)
To: small-list-digest ford-trucks.com
Subject: small-list-digest V3 #207
Reply-To: small-list ford-trucks.com
Sender: owner-small-list-digest ford-trucks.com
Errors-To: owner-small-list-digest ford-trucks.com
Precedence: bulk


small-list-digest Saturday, August 14 1999 Volume 03 : Number 207



=======================================================================
Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe small-list-digest" in the body of the
message.
=======================================================================
In this issue:

Re: FTE Small - Replacing the Radius Arm Bushing
[none]
FTE Small - Re:
FTE Small - RE: Owners manuals
FTE Small - Brake light switch

=======================================================================

----------------------------------------------------------------------

Date: Fri, 13 Aug 1999 09:42:38 -0400
From: "4xFord"
Subject: Re: FTE Small - Replacing the Radius Arm Bushing

- ----- Original Message -----
From: Bill Adams
To:
Sent: Thursday, August 12, 1999 10:16 PM
Subject: Re: FTE Small - Replacing the Radius Arm Bushing
SNIP
> I second those emotions! I did change the Passenger side Radius arm
> bushing on my 92 Explorer 2WD. It was about 6 hours of frustrating work.
> You have to completely pull the 'axle' out to get the radius arm to move
> far enough forward to get the new bushing on. I would not tackle it
> again if I could afford to pay someone else to do it.
> After I was through I built a metal heat shield which I bolted between
> the bushing and the cat. Hope that will delay the day when this has to
> be done again.
>
SNIP

You don't have to go through all that to remove the radius arm bushing...and
easier (note: not easy) meathod would be to remove the 2 rivits on both
radius arm bracket where they attach to the frame...this isn't a fun job,
but much easier than making the complete front axle assembly...just use a
grinder or a air hammer and chissel to remove the heads of the rivits and
knock them through with a punch and take out the other 2 bolts on each
side...then you take the nut off the radius arms and replace the
bushings...replace the rivits with a grade 8 bolt and you're done...now it's
a fairly easy job to do next time.

if you put on a lift kit, then the rivits are already gone (either to put in
drop brackets or extended radius arms), and it is an easy job to replace the
RA bushing.

Bryce

*** Visit 4xFord's Ranger Page
*** http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.bigfoot.com/~4xFord
*** E-Mail 4xFord bigfoot.com.nospam
*** Remove the .nospam to reply
*** ICQ #14760168


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 13 Aug 1999 11:59:52 -0400
From: "QUINONES ARMANDO (TSP1AXQ)"
Subject: [none]

i recently purchased a 1992 ford explorer sport. does anybody know of
a website where i can download the original owners manual?

thanks
armando

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 13 Aug 1999 12:28:16 -0400
From: David Cooley
Subject: FTE Small - Re:

At 11:59 AM 8/13/1999 -0400, you wrote:
>i recently purchased a 1992 ford explorer sport. does anybody know of
>a website where i can download the original owners manual?


WWW.FORD.COM

Register for the Owner connection and it will link you to all the manuals
for your explorer


===========================================================
David Cooley N5XMT Internet: N5XMT bellsouth.net
Packet: N5XMT KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 13 Aug 1999 11:43:16 -0500
From: "Strukel, Mike"
Subject: FTE Small - RE: Owners manuals

You should be able to order one via WWW.Autolit.com




- -----Original Message-----
From: QUINONES ARMANDO (TSP1AXQ) [mailto:tsp1axq ups.com]
Sent: Friday, August 13, 1999 11:00 AM
To: small-list ford-trucks.com
Subject:


i recently purchased a 1992 ford explorer sport. does anybody know of
a website where i can download the original owners manual?

thanks
armando

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 14 Aug 1999 00:14:48 EDT
From: Rmisker aol.com
Subject: FTE Small - Brake light switch

Hi you all

I just got my 94 Ford Ranger XLT 2.3l back from the body shop and it looks
great. One problem though. My brake lights work. I have checked everything
and the only time that they do work is when I actually move the switch up or
down. My question is this. Is there an adjustment on those switches? This
is not the switch that has the screw on it, it is the one that has the U
shape side to it. I was told that if you move the spring that it would
adjust the switch in or out depending on what you need however.....I can not
get my fingers in there to see if it moves. If you all could help I would
appreciate it.


Thanks Rob
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of small-list-digest V3 #207
********************************

+- Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar --+....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.