small-list-digest Wednesday, July 22 1998 Volume 02 : Number 204



=======================================================================
Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe small-list-digest" in the body of the
message.
=======================================================================
In this issue:

Re: FTE Small - beeping
FTE Small - FW: Consumer Request Response
FTE Small - Re: beeping
Re: FTE Small - beeping
FTE Small - Fellow Ford fan has passed on.
FTE Small - Looking for help from Ford Parts Experts
FTE Small - 4.0L... where is all the coolant going?

=======================================================================

----------------------------------------------------------------------

Date: Tue, 21 Jul 1998 07:54:12 -0400
From: "Patrick Frazer"
Subject: Re: FTE Small - beeping

> From: Ken Morrill
> Subject: FTE Small - beeping
>
> Does anyone know how to disable the annoying beeper that beeps 5
> five times everytime I start my truck (98 Ranger)

Umm, put your seat belt on?
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 21 Jul 1998 08:02:31 -0000
From: Michael Peacock
Subject: FTE Small - FW: Consumer Request Response

To Ranger and BroncoII owners:
This is a response to a request for low gears in the transfer case for =
our vehicles, if you could take a moment to email the company below with =
your request for double-low transfer cases. Thanks - Mike


- -----Original Message-----
From: Jan Gremillion=20
Subject: Re: Consumer Request
Jan Gremillion [pullpal rof.net]

Dear Michael -

At this time, there is not enough of a call for this adaptation, and =
Advanced Adapters has no plans to start R & D. I'm told that utilizing =
the current Atlas would prove very expensive & time consuming.
It couldn't hurt to keep voicing your opinion, and getting your friends =
to do the same. Maybe someday there will be a majority, and enough =
cause for them to get something together for you.
Regards,

Pat Gremillion
Premier Power
Welder___________________________________________________________________=
___
_


>Build a 4 to 1 transfer case for Ranger and BroncoII Consumers! There's =
a
>lot of us out here!


== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 21 Jul 1998 08:36:55 -0700
From: "Greg Jacobs"
Subject: FTE Small - Re: beeping

If you're talking about the seatbelt warning, it won't beep if you do up
your seatbelt BEFORE you turn the ignition key on.

Greg

== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 21 Jul 1998 18:31:16 EDT
From: DAS1544 aol.com
Subject: Re: FTE Small - beeping

i dont think you can i think there is many other things that are hooked to the
same thing and the beeper sorry
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 21 Jul 1998 20:49:31 -0400
From: Ken Payne
Subject: FTE Small - Fellow Ford fan has passed on.

Just got some news that stunned me. Jim Osborn, of Jim Osborn
Reproductions, passed away Wednesday. Jim Osborn, in addition
to producing some of the finest reproduction decals, tags,
manuals and books for automotive enthusiasts, was also one
heck of a nice guy.

A couple of months ago, after having the pleasure of seeing
Jim's work first hand in his small plant, Jim offered Ford
Truck Enthusiasts a deal to help us continue to help our
fellow Ford truck fans. A discount on his products sold
through us. Jim didn't have to extend this offer, but he had
a genuine "I want to help out attitude." I know one of his
employees personally and can say that his workers truly
liked working for/with him. He was just an all around nice
guy.

For those who don't know, Jim founded the Mustang Club of
America and his lifelong dream was to start a Mustang museum.
His wife is planning on starting a fund to keep his dream
alive.

I'd like to take this opportunity to ask the members of these
lists to show that we're more than just about trucks. I've
made many friends here and I know from personal experience
that we have a good group here. Please, if you can spare a
few moments of your evening tonight or a few minutes tomorrow,
pick up a card and send it to:

Jim Osborn Reproductions
101 Ridgecrest Drive
Lawrenceville, GA 30045

If you want to, send a few bucks with a note stating it's
for the Mustang museum. Also, let them know its from an FTE
member, I think this, in a small way, will let them know
that we appreciated him.

Regards,
Ken Payne
CoAdmin, Ford Truck Enthusiasts, Inc.
http://www.ford-trucks.com


== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 21 Jul 1998 18:27:28 -0700
From: "Bob Marrs"
Subject: FTE Small - Looking for help from Ford Parts Experts

I'm working on a Bronco II 2.9L project and interested in finding a Mass Air
Flow Meter Set-up for the 2.9L engine to replace the current speed density
set-up. I understand that in some 1990 2.9L engines (Ranger or Bronco II)
there was a California smog set-up option which had this set-up. I was
hoping one of the parts experts out there had some time to research this and
find out the Ford Part numbers. This info would be very helpful as this
conversion could allow some great engine building options on the 2.9L.
Thanks for any help, Bob Marrs.

== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Tue, 21 Jul 1998 21:06:54 -0700
From: "Ulysses Samilo"
Subject: FTE Small - 4.0L... where is all the coolant going?

>
> Date: Mon, 20 Jul 1998 07:34:14 -0400 (EDT)
> From: EI - Michael Ioco
> Subject: FTE Small - 4.0L... where is all the coolant going?
>
> I'm stumnped. I'm trying to figure out where my radiator coolant is
going.
> I've added about a half gallon and I only have 8K on the odometer. I
fill the
> resevior up to and sometimes past the fill line, and a week later, it's
DRY.
> Anybody else experienced this? The past three times I've checked it, I
found a
> dry reservior. 4.0 owners, keep an eye on this!
>

Check your tail pipe to see if you have excessive water dripping out of
there when you first start up. If you do, take a whif to see if it smells
llike coolant. If you don't have water coming out of the tail pipe, check
your spark plugs one at a time to see if they are
fouled and have water on them. If they do then your coolant is getting
into the cylinder with the bad plug(s). That would mean you need a new head
gasket. To make sure take a compression test and check against specs.

98 Ranger 4X4 XLT SC 4.0L


Ulysses Samilo
High Speed Logic Design Engineer
Email: (wk) ulyssess amcc.com
(hm) usamilo1 san.rr.com
WWW: http://www.ford-trucks.com//lc/lc.php?action=do&link=http://home.san.rr.com/ulysses
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

End of small-list-digest V2 #204
********************************....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.