Return-Path:
Date: Mon, 2 Mar 1998 04:46:45 -0700 (MST)
From: owner-fordtrucks-small-digest ListService.net (fordtrucks-small-digest)
To: fordtrucks-small-digest ListService.net
Subject: fordtrucks-small-digest V2 #63
Reply-To: fordtrucks-small ListService.net
Sender: owner-fordtrucks-small-digest ListService.net


fordtrucks-small-digest Monday, March 2 1998 Volume 02 : Number 063



=======================================================================
Ford Truck Enthusiasts - Ranger, Explorer & Bronco 2
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
fordtrucks-small-digest-request listservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

3.0 V6 [Ken Payne ]
Re: 3.0 V6 [Gardner ]
exhaust [CNOEL webtv.net (Christopher Noel)]
under pulleys [CNOEL webtv.net (Christopher Noel)]
tornado [CNOEL webtv.net (Christopher Noel)]
Explorer Rear Axle... [Mike Krause ]
Re: tornado [Geoffrey Hoffman ]
Re: under pulleys [TCPFL ]

=======================================================================

----------------------------------------------------------------------

Date: Sun, 01 Mar 1998 17:30:15 -0500
From: Ken Payne
Subject: 3.0 V6

Is the 3.0 V6 used in the Taurus and Aerostar the same
engine that's in the small truck line? I'm getting
one for free and I'm not sure if I ought to spend $$$
rebuilding it for a Ranger I might buy (no engine).

Ken

------------------------------

Date: Sun, 01 Mar 1998 18:21:36 -0500
From: Gardner
Subject: Re: 3.0 V6

Ken Payne wrote:
>
> Is the 3.0 V6 used in the Taurus and Aerostar the same
> engine that's in the small truck line? I'm getting
> one for free and I'm not sure if I ought to spend $$$
> rebuilding it for a Ranger I might buy (no engine).
>
> Ken
>
> +---------Ford Truck Enthusiasts - Ranger, Explorer & Bronco 2--------+
> | Send posts to fordtrucks-small listservice.net, |
> | List removal information is on the web site. |
> +---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+

Sure is Ken! The only thing is that if it out of a Taurus some of the
mounts may be different since it coming out of a front wheel drive car!
Good Luck

JUST drop in a 5.0

------------------------------

Date: Sun, 1 Mar 1998 22:30:57 -0500
From: CNOEL webtv.net (Christopher Noel)
Subject: exhaust

what is the difference between dual exhaust and cat black exhaust. also
is changing to a free flowing converter worth the extra money?

Christopher H. Noel

------------------------------

Date: Sun, 1 Mar 1998 22:32:37 -0500
From: CNOEL webtv.net (Christopher Noel)
Subject: under pulleys

does anyone make under pulleys for the 3.0 ranger and if so would this
damage any components to the engine?

Christopher H. Noel

------------------------------

Date: Sun, 1 Mar 1998 22:41:44 -0500
From: CNOEL webtv.net (Christopher Noel)
Subject: tornado

anybody try the tornado product? did you like it or was it a waste of
money?

Christopher H. Noel

------------------------------

Date: Sun, 01 Mar 1998 22:58:33 -0600
From: Mike Krause
Subject: Explorer Rear Axle...

I was just wondering what type of rear axle a '91 Explorer XLT, 2 wheel
drive has. Also, I want to convert the rear drums to discs and want a
company that can give me the conversion along with drilled or slotted
rotors with bigger than stock rotors. If anyone can give me some names
of companies or point me in the right direction I'd really appreciate
it. Any advise is always welcome. Thanks.
Mike Krause
mkrause thewoodlandstx.com

------------------------------

Date: Mon, 2 Mar 1998 00:26:48 -0500
From: Geoffrey Hoffman
Subject: Re: tornado

At 10:41 PM -0500 3/1/98, Christopher Noel wrote:
>anybody try the tornado product? did you like it or was it a waste of
>money?

i have heard all over the net, and on the newsgroups that it is more of the
later....

i dunno, i would say that you could spend the 70 bucks on something else.


Geoffrey Hoffmanhttp://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.pobox.com/~hoffy/
Cornell Universitygch2 cornell.edu

------------------------------

Date: Mon, 2 Mar 1998 04:58:41 EST
From: TCPFL
Subject: Re: under pulleys

In a message dated 98-03-01 22:32:50 EST, you write:


damage any components to the engine? >>

Try Steeda Auto Sports. www.steeda.com

Regards
Tom

------------------------------

End of fordtrucks-small-digest V2 #63....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.