Return-Path:
Date: 25 Feb 98 08:23:57 EST
From: RandalDGazdecki eaton.com
Subject: fwd: fordtrucks-small-digest V2 #53
To: kpayne mindspring.com



Randy
randaldgazdecki eaton.com
Eaton Corporation, S.I.C.D.

"I'd rather be a failure at something
I enjoy than be a success at
something I hate."
-George Burns
---------- Original Text ----------

From: C=US/A=INTERNET/DDA=ID/fordtrucks-small(a)ListService.net, on 2/21/98 5:48 AM:
To: Randal D Gazdecki PCBU SICDMILWI,EatonWHQ CorpMail WHQCleveOH[C=US/A=INTERNET/DDA=ID/fordtrucks-small-digest(a)ListService.net]


fordtrucks-small-digest Saturday, February 21 1998 Volume 02 : Number 053



=======================================================================
Ford Truck Enthusiasts - Ranger, Explorer & Bronco 2
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
fordtrucks-small-digest-request listservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

Rewiring 98 Ranger fog lights [EdDSP aol.com]
Re: Rewiring 98 Ranger fog lights ["Bryce" ]
ADMIN: Survey Results Working (Beta) [Ken Payne ]

=======================================================================

----------------------------------------------------------------------

Date: Fri, 20 Feb 1998 21:23:01 EST
From: EdDSP aol.com
Subject: Rewiring 98 Ranger fog lights

Anyone know exactly what to do in order to be able to activate the factory
foglights w/o turning on the headlights?

- -Ed

------------------------------

Date: Fri, 20 Feb 1998 23:10:37 -0500
From: "Bryce"
Subject: Re: Rewiring 98 Ranger fog lights

You would have to somehow bipass the relay thet is in the fuse/relay block
in the engine compartment...this relay is what is used to make them turn on
only with the low beams. I think that the easiest way would be to rewire
the fog lights with an aftermarket wiring harness for off road lights and
use the factory switch. Pep Boys sells just this type of harness for about
$20. I don't think that there is an easy way to use the existing wiring
from the truck unless you can get a goos schematic somewhere...my haynes
book doesn't even show the fogs in its diagrams.

Check the legality of this before you do this also...I'm pretty sure it's
not legal to have your fog lights on with any other light setting than with
the low beams in my neck of the woods....That doesn't mean that the
rice-boys in their rice-rockets don't run around in the daylight with fogs
on around here.

Bryce
Bryce's 4xFord Ranger Page
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.geocities.com/baja/2995

- ----------
> From: EdDSP aol.com
> To: fordtrucks-small listservice.net
> Subject: Rewiring 98 Ranger fog lights
> Date: Friday, February 20, 1998 9:23 PM
>
> Anyone know exactly what to do in order to be able to activate the
factory
> foglights w/o turning on the headlights?
>
> -Ed
> +---------Ford Truck Enthusiasts - Ranger, Explorer & Bronco 2--------+
> | Send posts to fordtrucks-small listservice.net, |
> | List removal information is on the web site. |
> +---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+

------------------------------

Date: Sat, 21 Feb 1998 01:38:59 -0500
From: Ken Payne
Subject: ADMIN: Survey Results Working (Beta)

I've finally got the survey results working. Rather than continue
to use the brain-dead CGI script for results (it was giving very
bizarre results) I wrote a C++ program that sorts a 450k file
into survey percentages and builds a 300k+ HTML result file.
Your browser displays this file. Fairly quick considering that
its doing about several million parses (takes about 10 seconds) on
a multi-user Sun Workstation. This is a beta version. Although
I've been programming for years this is my first complete dynamic
web content program. It took about 1 day of coding. I think most
everyone will like it. It will be greatly enhanced over the course
of the weekend, with sorting and better catagorization.

Give it a try (its not directly linked on the web site so you
have to use this URL):

http://www.ford-trucks.com/survey/results/t.shtml

Let me know what you think and give me any suggestions.

I'm also working on a program which will allow password protected
access to the web site. This will allow me to give free web
space to users, within reason. Lastly, I hope to replace the
Java chat server with my own C/C++ program. Both these projects
are considerably harder than the survey program.

Ken Payne
Admin, Ford Truck Enthusiasts
http://www.ford-trucks.com

------------------------------

End of fordtrucks-small-digest V2 #53
*************************************....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.