Please do not repost, forward or otherwise publish messages
contained in these archives without consent from the respective
author(s). These archives may not, in whole or part, be stored on
any public retrieval system (FTP, web, gopher, newsgroup, etc.) by
individuals or companies, without consent of the respective authors.

Received: with LISTAR (v0.128a; list small-list); Sat, 10 Jun 2000 18:43:56 -0400 (EDT)
Date: Sat, 10 Jun 2000 18:43:56 -0400 (EDT)
From: Ford Truck Enthusiasts List Server ford-trucks.com>
To: small-list digest users ford-trucks.com>
Reply-to: small-list ford-trucks.com
Subject: small-list Digest V2000 #85
Precedence: bulk

==========================================================
Ford Truck Enthusiasts Small Chassis Truck Mailing List

Visit our web site: http://www.ford-trucks.com

To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe small-list" in the subject of the
message.
==========================================================

------------------------------------
small-list Digest Thu, 08 Jun 2000 Volume: 2000 Issue: 085

In This Issue:
Re: Gun Rack for a Ranger
Re: Gun Rack for a Ranger
Re: Gun Rack for a Ranger
How hard would it be to......
What priced used?
Re: What priced used?
no 4x4
Re: no 4x4
Re: no 4x4
Re: What priced used?

----------------------------------------------------------------------

From: Eric Sneed REIL.COM>
Subject: Re: Gun Rack for a Ranger
Date: Thu, 8 Jun 2000 16:23:36 -0700

http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.bigskyracks.com/

Eric

-----Original Message-----
From: ROlson1039 aol.com [SMTP:ROlson1039 aol.com]
Sent: Thursday, June 08, 2000 4:06 PM
To: small-list ford-trucks.com
Subject: [small-list] Re: Gun Rack for a Ranger

I dunno but if ya find one please let me know! LOL
==========================================================
To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe small-list" in the subject of the
message.

------------------------------

From: Eric Sneed REIL.COM>
Subject: Re: Gun Rack for a Ranger
Date: Thu, 8 Jun 2000 16:31:07 -0700

http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.redrocksports.com/sports/webSession/store/dept-5/department/dept-
5/item/50800
-5/item/50800>

Eric

-----Original Message-----
From: ROlson1039aol.com [SMTP:ROlson1039aol.com]
Sent: Thursday, June 08, 2000 4:06 PM
To: small-listford-trucks.com
Subject: [small-list] Re: Gun Rack for a Ranger

I dunno but if ya find one please let me know! LOL
==========================================================
To unsubscribe, send email to: listarford-trucks.com with
the words "unsubscribe small-list" in the subject of the
message.

------------------------------

From: Eric Sneed REIL.COM>
Subject: Re: Gun Rack for a Ranger
Date: Thu, 8 Jun 2000 16:32:53 -0700

http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.seatbackgunrack.com/



-----Original Message-----
From: Eric Sneed [SMTP:ESneedreil.com]
Sent: Thursday, June 08, 2000 4:24 PM
To: 'small-listford-trucks.com'
Subject: [small-list] Re: Gun Rack for a Ranger

http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.bigskyracks.com/

Eric

-----Original Message-----
From: ROlson1039aol.com [SMTP:ROlson1039aol.com]
Sent: Thursday, June 08, 2000 4:06 PM
To: small-listford-trucks.com
Subject: [small-list] Re: Gun Rack for a Ranger

I dunno but if ya find one please let me know! LOL
==========================================================
To unsubscribe, send email to: listarford-trucks.com with
the words "unsubscribe small-list" in the subject of the
message.
==========================================================
To unsubscribe, send email to: listarford-trucks.com with
the words "unsubscribe small-list" in the subject of the
message.

------------------------------

From: "Joey Ramsey" hotmail.com>
Subject: How hard would it be to......
Date: Thu, 08 Jun 2000 17:10:30 PDT

Put a turbo in an 83 2.3liter long wheelbase rangers? I found apower run
turbo out of an 89 fuel injected escort that I think I could rig up. But
what would I need to do it right? What cars are possible donors?
-Joe

________________________________________________________________________


------------------------------

Date: Thu, 08 Jun 2000 21:32:54 -0700
From: Adam McLaughlin jps.net>
Subject: What priced used?

I have the option to buy a 1987 2.9. It has 180 compression acorss all
six cylinders. The junkyard wants $800 for it. Is this a fair price? The
engine comes complete from intake to exhaust manifold, save the wiring
harness. (But all of the sensors and parts are there)

What do you guys think?

My current 2.9 has that same compression (190 to 180) and 170K miles on
it. I like to keep extras on the shelf, so would this one be a good
candidate? Is the price fair?

Northern California.

Adam


------------------------------

Date: Fri, 09 Jun 2000 00:49:42 -0400
From: Stephen Bozzone rockzone.com>
Subject: Re: What priced used?

How many miles? Seems a bit pricey to me.. just for the engine.

Regards,
Steve

Adam McLaughlin wrote:
>
> I have the option to buy a 1987 2.9. It has 180 compression acorss all
> six cylinders. The junkyard wants $800 for it. Is this a fair price? The
> engine comes complete from intake to exhaust manifold, save the wiring
> harness. (But all of the sensors and parts are there)

--
Stephen Bozzone
Administrative Director - http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.rockzone.com
ICQ: 196843 / AIM: RudeSkam69
"Don't ask me to justify my life..." - Bad Religion

------------------------------

From: "Steve Nash" erols.com>
Subject: no 4x4
Date: Fri, 9 Jun 2000 13:46:22 -0400

My Explorer is 1991 4x4, but the 4x4 doesn't work. When you push the button
there is an electronic clicking noise from the drivers side rear of the
truck. Anyone have any ideas on what the problem is? BTW, it will go into
4x4 about once out of every 20 times you hit the button.

Steve


------------------------------

Date: Fri, 09 Jun 2000 14:46:54 -0400
From: Stephen Bozzone rockzone.com>
Subject: Re: no 4x4

Sounds like your electronic shifter motor.. looks like a large wiper
motor by your transfercase. They are expensive actually. You can try
tapping it with a rubber hammer.. that works for some people, but it's
only a temporary fix.

Some people have luck with ones from a junkyard.

Good luck and by all means get a second opinion,
Steve

Steve Nash wrote:
>
> My Explorer is 1991 4x4, but the 4x4 doesn't work. When you push the button
> there is an electronic clicking noise from the drivers side rear of the
> truck. Anyone have any ideas on what the problem is? BTW, it will go into
> 4x4 about once out of every 20 times you hit the button.
>
> Steve
>
> ==========================================================
> To unsubscribe, send email to: listarford-trucks.com with
> the words "unsubscribe small-list" in the subject of the
> message.

--
Stephen Bozzone
Administrative Director - http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.rockzone.com
ICQ: 196843 / AIM: RudeSkam69
"Don't ask me to justify my life..." - Bad Religion

------------------------------

Date: Fri, 09 Jun 2000 15:18:17 -0400
From: David Cooley bellsouth.net>
Subject: Re: no 4x4

At 01:46 PM 6/9/2000, you wrote:
>My Explorer is 1991 4x4, but the 4x4 doesn't work. When you push the button
>there is an electronic clicking noise from the drivers side rear of the
>truck. Anyone have any ideas on what the problem is? BTW, it will go into
>4x4 about once out of every 20 times you hit the button.


Could be the shift motor on the transfer case has dirty contacts in
it. Check out www.4x4central.com for a procedure on how to clean the motor.


===========================================================
David Cooley N5XMT Internet: N5XMTbellsouth.net
Packet: N5XMTKQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
I am Pentium of Borg... Division is Futile!
===========================================================


------------------------------

Date: Sat, 10 Jun 2000 16:43:33 -0700
From: Adam McLaughlin jps.net>
Subject: Re: What priced used?

Hi Steve,

They didn't say. They just told me compression. Simply put, "180".

Just for kicks, I tested my compression on my 175K mile 2.9. With a brand new
compression guage, I found 165 to 170 in all six cylinders. I tested 90
minutes after I shut off the engine.

Is there much difference between the two? Would it be noticeable if I swapped
motors?

I was interested in the engine just for a back-up in case something goes
wrong.

Adam

Stephen Bozzone wrote:

> How many miles? Seems a bit pricey to me.. just for the engine.
>
> Regards,
> Steve
>
> Adam McLaughlin wrote:
> >
> > I have the option to buy a 1987 2.9. It has 180 compression acorss all
> > six cylinders. The junkyard wants $800 for it. Is this a fair price? The
> > engine comes complete from intake to exhaust manifold, save the wiring
> > harness. (But all of the sensors and parts are there)
>
> --
> Stephen Bozzone
> Administrative Director - http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.rockzone.com
> ICQ: 196843 / AIM: RudeSkam69
> "Don't ask me to justify my life..." - Bad Religion
> ==========================================================
> To unsubscribe, send email to: listarford-trucks.com with
> the words "unsubscribe small-list" in the subject of the
> message.


------------------------------

End of small-list Digest V2000 #85
**********************************
----------------------------------------------------------
Ford Truck Enthusiasts Small Chassic Truck Mailing List
Covering the Ranger, Bronco II, Exploer and Aerostar

Send posts to small-listford-trucks.com

If you ever want to remove yourself from this mailing
list, send an email to:

listarford-trucks.com

with the words "unsubscribe small-list" in the subject of
the message.

Visit Our Web Site: http://www.ford-trucks.com
----------------------------------------------------------

....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.