Return-Path:
Date: Tue, 14 Oct 1997 03:50:28 -0600 (MDT)
From: owner-fordtrucks-digest ListService.net (fordtrucks-digest)
To: fordtrucks-digest ListService.net
Subject: fordtrucks-digest V1 #21
Reply-To: fordtrucks ListService.net
Sender: owner-fordtrucks-digest ListService.net


fordtrucks-digest Tuesday, October 14 1997 Volume 01 : Number 021



=======================================================================
Ford Truck Enthusiasts - 1960 And Older Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
fordtrucks-digest-request listservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

info on F7 engine [Jeff Hazewinkel ]
Need: Ignition Tumbler for 51 F [QNKY92A prodigy.com ( JEANNINE MARIE)]
Re: visor help [Ken Payne ]
ADMIN: Our history is now on line [Ken Payne ]
Frustration with repro Ford parts [JRFiero aol.com]
51 grill color [JRFiero aol.com]
F7 engine [rmeier connect.net (Roger Meier)]
Re: Frustration with repro Ford parts [Art Starkey

=======================================================================

----------------------------------------------------------------------

Date: Mon, 13 Oct 1997 09:30:28 -0500
From: Jeff Hazewinkel
Subject: info on F7 engine
>
I have done a little more investigation into a F7 engine I recently
purchased to put in my F600. It is a model 8EQ-B which my research
indicates was used in 48-50 and was actually a Lincoln engine. I am
looking for someone who may have a 48-50 F7 or F8 with this engine to
see if I can retrieve some info regarding engine mounts and potential
parts sources. Any help would be appreciated.

Jeff

------------------------------

Date: Mon, 13 Oct 1997 13:18:16, -0500
From: QNKY92A prodigy.com ( JEANNINE MARIE)
Subject: Need: Ignition Tumbler for 51 F

Hello,

We recently purchased a '51 F1, and now are in need of the ignition
tumbler (it went bad after we bought it). We've checked our usual
sources and all they have is the ignition switch housing for the '51.



Can anyone help?

Jared & Jeannine Cascadden
email QNKY92A prodigy.com

'51 F1 flathead 6
'57 F100 big window short bed 292 (soon perhaps a 312 t-bird)

------------------------------

Date: Mon, 13 Oct 1997 18:41:15 -0400
From: Ken Payne
Subject: Re: visor help

At 05:07 AM 10/12/97 -0400, you wrote:
>I have an aftermarket visor for my '53 F100 that I bought at the
>Greatwoods swap meet 2 years ago but when I finally tried to install it
>I discovered that the end brackets or hinges are incorrect - do any of
>you experts out there have a solution? The brackets I have are for a
>curved A-pillar like a (gasp) CHEVY! - Mick at prices ma.ultranet.com

Have you checked with any good machine shops to see if they could
fabricate brackets?

------------------------------

Date: Mon, 13 Oct 1997 19:18:02 -0400
From: Ken Payne
Subject: ADMIN: Our history is now on line

I've kept a file of our history since nearly the beginning.
I just put it up on the web site. Some of you might find
it interesting.

Ken

------------------------------

Date: Mon, 13 Oct 1997 21:24:45 -0400 (EDT)
From: JRFiero aol.com
Subject: Frustration with repro Ford parts
>
Well, I spent way too long doing what should have been a quick and easy
improvement to my 51 F1, and I'm pi...d, er, frustrated. I've purchased too....

---

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.