Received: with LISTAR (v0.129a; list pre61-list); Sat, 28 Oct 2000 11:35:56 -0400 (EDT)
Date: Sat, 28 Oct 2000 11:35:56 -0400 (EDT)
From: Ford Truck Enthusiasts List Server <listar ford-trucks.com>
To: pre61-list digest users <listar ford-trucks.com>
Reply-to: pre61-list ford-trucks.com
Subject: pre61-list Digest V2000 #208
Precedence: list

==========================================================
Ford Truck Enthusiasts 1948-1960 Truck  Mailing  List

Visit our  web site: http://www.ford-trucks.com

To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe pre61-list" in the subject  of  the
message.
==========================================================

------------------------------------
pre61-list Digest Thu, 26 Oct 2000 Volume: 2000  Issue: 208

In This Issue:
Re: Panel Gas Tank/Exhaust
50 F1 Wabble
Re: ECI disc brake kits
Re: rear end width again
Re: ECI disc brake kits
Re: ECI disc brake kits
Re: ECI disc brake kits
Subscription to forum at http://www.ford-trucks.com/cgi-b

----------------------------------------------------------------------

From: "Vierra, William BGI WAC" <William.Vierra barclaysglobal.com>
Subject: Re: Panel Gas Tank/Exhaust
Date: Thu, 26 Oct 2000 09:34:12 -0700

The only reason I can think of for mounting the gas tank inside the frame is
tradition and safety.  The other major manufacture of trucks on there 1974
to 1988 models put the tank out side the frame and has had multiple law
suits because of the propensity for fire and explosion from a side impact.
They have on their new models moved the tank inside the frame rail.

------------------------------

From: "Debi & Rick Maxted" <drmaxted hotmail.com>
Subject: 50 F1 Wabble
Date: Thu, 26 Oct 2000 18:36:48 GMT

Hello there All,

Anyone have a comment on my suspension setup. Volarie front clip, power
steering, BF Goodrich TA's wide rears and 9" Ford rear.
Going down the road bumps seem to send this thing hopping from side to side.
Like jumping track!
Normal? Anyone else experience the same type of ride and handling?


Thanks,
Rick
50 F1
49 F1 For Sale

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.hotmail.com.

Share information about yourself, create your own public profile at
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://profiles.msn.com.


------------------------------

Date: Thu, 26 Oct 2000 12:12:47 -0700 (PDT)
From: Dennis Moody <zeener96 yahoo.com>
Subject: Re: ECI disc brake kits

I have the kit, purchased it from no limit.

Well made, high quality kit that looks good.  The O.D. of the bearing
adapters is too large, but that seems to be common from all kits.

Can't give any performance results, I only have the chassis
completed.

Dennis
--- Earl Capps <ecapps bellsouth.net> wrote:
> Has anyone ever used ECI, www.ecihotrodbrakes.com, disc brake kits?
>  I'm thinking of using the 5 x 5 1/2 bracket kit that uses Ford
> truck rotors and GM calipers.
>
> earl
> '55 F250 429
> Earl Capps
> ecapps bellsouth.net
>
>
>
----------------------------------------------------------------------------
> Access your e-mail anywhere, at any time.
> Get your FREE BellSouth Web Mail account today!
> http://www.ford-trucks.com//lc/lc.php?action=do&link=http://webmail.bellsouth.net
>
----------------------------------------------------------------------------
> =============================================================
> To  unsubscribe:   www.ford-trucks.com/mailinglist.html#item3
> Please remove this footer when replying.
>


=====
Zeener96 yahoo.com

__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf!  It's FREE.
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://im.yahoo.com/

------------------------------

From: "Terry" <kartrace ticnet.com>
Subject: Re: rear end width again
Date: Thu, 26 Oct 2000 14:30:06 -0500

I would guess that one site is refering to the housing length, the other is
measuring from the axles.


>http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.ridgenet.net/~biesiade/Fordrears.html
>
>http://www.ford-trucks.com//lc/lc.php?action=do&link=http://idt.net/~windxi19/9inch.html
>
 Hi thanks for the info on rear end width but these two pages are so far
apart on there measurements that I'm more confused now than I was before.
I'm I reading them right?



------------------------------

From: GILASAILR aol.com
Date: Thu, 26 Oct 2000 19:26:35 EDT
Subject: Re: ECI disc brake kits

Bought mine from Super Bell, I believe they are called 'Super Stopper Kit.'
Bearings fit fine, bracket is well made (forged)? the only problem was the
dust cover (backing plate) encountered some interference but eventually was
persuaded to comply. Yes, I would buy from them again, they seem straight-up
folks. I have ECI brake master cyl/boost/pedal the quality is above average,
the support is less than amusing.But they are 'okay.'
Gary O.
47 1/2 ton Panel
4.9L, C6, 9"Currie......near stock front end except brakes!

------------------------------

From: "Jack Wart" <jack circleburners.com>
Subject: Re: ECI disc brake kits
Date: Thu, 26 Oct 2000 23:36:09 -0400

How much was the kit? I'm not familiar with no limit, tell me more.

Thanks.
-----Original Message-----
From: Dennis Moody <zeener96 yahoo.com>
To: pre61-list ford-trucks.com <pre61-list ford-trucks.com>
Date: Thursday, October 26, 2000 2:54 PM
Subject: [pre61-list] Re: ECI disc brake kits


>I have the kit, purchased it from no limit.
>



------------------------------

Date: Fri, 27 Oct 2000 08:10:25 -0700 (PDT)
From: Dennis Moody <zeener96 yahoo.com>
Subject: Re: ECI disc brake kits

The kit lists for $149,I got it at Pigeon Forge on special for $75.
No Limit Sells ChXXy and Ford truck stuff.  It is all custom
stuff like fuel tanks and suspension.  I like them because you can
call them and they answer your questions.  I have
found most suppliers don't know what they sell or how it works.

www.nolimit.net

Dennis


--- Jack Wart <jack circleburners.com> wrote:
> How much was the kit? I'm not familiar with no limit, tell me more.
>
> Thanks.


=====
Zeener96 yahoo.com

__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf!  It's FREE.
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://im.yahoo.com/

------------------------------

Date: Sat, 28 Oct 2000 11:35:12 -0400
From: admin ford-trucks.com
Subject: Subscription to forum at http://www.ford-trucks.com/cgi-b


Following are new messages posted in the Ford Truck
Enthusiasts message board forums.  If you have any
questions, please use the contact form on the web site.

To remove your subscription, visit our Message Board at
www.ford-trucks.com, login, view any forum and click the
subscription link.  If you are subscribed to any of our
mailing lists, you receive this message automatically
as part of that subscription and it can only be disabled
by unsubscribing from the mailing list.
Messages posted in 1948-1960 Ford trucks
===========================================================
"?302 with a new 5 speed in my 1957 4x4"
Posted by ryanwins on 10/26/2000 00:05:05
http://www.ford-trucks.com/dcforum/48_60/441.html#0

"RE: steering box"
Posted by ecapps on 10/26/2000 18:52:14
http://www.ford-trucks.com/dcforum/48_60/439.html#3

"RE: Frame swap"
Posted by chenders on 10/26/2000 19:57:22
http://www.ford-trucks.com/dcforum/48_60/398.html#6

"RE: merc"
Posted by chenders on 10/26/2000 20:04:15
http://www.ford-trucks.com/dcforum/48_60/278.html#3

"RE: New engine swap trouble"
Posted by chenders on 10/26/2000 20:14:01
http://www.ford-trucks.com/dcforum/48_60/430.html#4

"RE: ?302 with a new 5 speed in my 1957 4x4"
Posted by chenders on 10/26/2000 20:19:54
http://www.ford-trucks.com/dcforum/48_60/441.html#1

"'51/ '52 F-100 Fenders"
Posted by takjam on 10/27/2000 11:42:01
http://www.ford-trucks.com/dcforum/48_60/442.html#0

"RE: ?302 with a new 5 speed in my 1957 4x4"
Posted by Kenny on 10/27/2000 12:47:05
http://www.ford-trucks.com/dcforum/48_60/441.html#2

"fenders"
Posted by barry on 10/27/2000 14:20:21
http://www.ford-trucks.com/dcforum/48_60/442.html#1

"RE: fenders"
Posted by kpayne on 10/27/2000 15:01:31
http://www.ford-trucks.com/dcforum/48_60/442.html#2

"RE: Oops.."
Posted by newfordguy on 10/27/2000 23:39:02
http://www.ford-trucks.com/dcforum/48_60/436.html#4

"Volari clip"
Posted by LOBUCK on 10/27/2000 23:47:51
http://www.ford-trucks.com/dcforum/48_60/443.html#0



------------------------------

End of pre61-list Digest V2000 #208
***********************************
----------------------------------------------------------
<><><><><><> Serious Help Finding That Part! <><><><><><>
Ford Truck Enthusiasts now has "Ford Products Interchange"
manuals in its online store.  Two editions: 1950-1965 and
1963-1974.  Cross references thousands of Ford parts.
<a href="http://www.motorhaven.com/">
http://www.motorhaven.com/</a>
----------------------------------------------------------
Ford Truck Enthusiasts 1948-1960 Truck List

Send posts to pre61-list....

---

To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.