Received: with LISTAR (v0.129a; list pre61-list); Thu, 14 Sep 2000 23:07:33 -0400 (EDT)
Date: Thu, 14 Sep 2000 23:07:33 -0400 (EDT)
From: Ford Truck Enthusiasts List Server <listar ford-trucks.com>
To: pre61-list digest users <listar ford-trucks.com>
Reply-to: pre61-list ford-trucks.com
Subject: pre61-list Digest V2000 #175
Precedence: list

==========================================================
Ford Truck Enthusiasts 1948-1960 Truck  Mailing  List

Visit our  web site: http://www.ford-trucks.com

To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe pre61-list" in the subject  of  the
message.
==========================================================

------------------------------------
pre61-list Digest Wed, 13 Sep 2000 Volume: 2000  Issue: 175

In This Issue:
ADMIN: FTE Picture Gallery Additions
Steering
narrow rearend
Re: narrow rearend
: Re: Bushing reamer?
1958 F100 for sale
Re: : Re: Bushing reamer?
Subscription to forum at http://www.ford-trucks.com/cgi-b

----------------------------------------------------------------------

Date: Wed, 13 Sep 2000 21:02:57 -0400
From: Ken Payne <kpayne ford-trucks.com>
Subject: ADMIN: FTE Picture Gallery Additions

The following trucks have been added to the Ford
Truck Enthusiasts web site Picture Gallery:

1998 F-150 Lariat
1984 F-150 XLT
1979 F-150 4x4
1979 F-150
1976 F-100 Ranger
1976 F-100
1961 F-100
1953 F-100

Ken Payne
Admin, Ford Truck Enthusiasts


------------------------------

From: FISHROT1 aol.com
Date: Wed, 13 Sep 2000 22:38:33 EDT
Subject: Steering

Hey,
  I have a '60 F-100 with the 223 six in it, and am in need of doing
something with my steering gearbox. As always money is a primary issue. I
would like to upgrade to power steering, and was wondering if anyone had any
ideas on a late model power steering unit that would go into it with little
or no modifications? I know the no mods is asking a bit much, but you never
know.
  Also if I decide not to go with the power steering unit, where is there a
vendor where I can get a rebuild kit, or send my unit out to be rebuilt?  The
one that I have found want between $250-$500 for a rebuild kit and a rebuilt
unit respectivly.
  Any help anyone can give me would be most appreciated, you all have been a
help in the past and I am sure someone can help me on this.

                                                   Erik  Fishrot1 aol.com

------------------------------

From: "Douglas R." <my59f100 hotmail.com>
Subject: narrow rearend
Date: Thu, 14 Sep 2000 00:31:31 EDT




Is there a Ford product out there with a 9" Ford rear end with a width from
backing plate to backing plate about 50"-51".
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.hotmail.com.

Share information about yourself, create your own public profile at
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://profiles.msn.com.


------------------------------

Date: Thu, 14 Sep 2000 07:33:33 -0400
From: David Russow <drussow globalbiz.net>
Subject: Re: narrow rearend



"Douglas R." wrote:

> Is there a Ford product out there with a 9" Ford rear end with a width from
> backing plate to backing plate about 50"-51".

NO

>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://www.ford-trucks.com//lc/lc.php?action=do&link=http://profiles.msn.com.
>
> =============================================================
> To  unsubscribe:   www.ford-trucks.com/mailinglist.html#item3
> Please remove this footer when replying.


------------------------------

From: "Terry" <kartrace ticnet.com>
Subject: : Re: Bushing reamer?
Date: Thu, 14 Sep 2000 13:50:05 -0500

Thanks group for heads up. My brother is toolmaker at local machine shop and
will perform the necessary installation and reaming of the new bushings. He
will also press in the new king pins.

Let him know the kingpin bushing reamer is piloted and is supposed to line
ream them together. Most non atomotive machine shops wont have this style
reamer available. The size is also very critical. The kingpin should fit
very tight in the bushing. You should have to hammer it in when you assemble
it.


------------------------------

Date: Thu, 14 Sep 2000 14:56:42 -0500
From: Laura Nelson <lnelson gsbs3.gs.uth.tmc.edu>
Subject: 1958 F100 for sale

Dear Fellow Truckers,

I hope some of you can understand, but the time has come for me to
part with my good buddy, Big Red.  Before posting an ad somewhere, I
wondered if anyone out there is interested in it.  I've had it for 8 1/2
years and it has been one of the most reliable vehicles I've ever had.  It
runs great, needs body work and a paint job, but mostly it needs a good
home.  It has the original, but rebuilt 292 engine, has had alot of stuff
under the hood replaced, but is overall pretty original.  I don't have any
digital pictures of it on the web anywhere, but I do have regular pictures
I'd be happy to mail out.  It's got alot of potential to someone who has
the time, $$, and knowledge (that I do not have) to give it the tender,
loving care it needs.

Thanks,

Laura Nelson
Houston, TX



------------------------------

From: "B Hale" <wlhale csrlink.net>
Subject: Re: : Re: Bushing reamer?
Date: Thu, 14 Sep 2000 17:51:12 -0400

Thanks for the advice. I guess it wouldn't be a bargain if it's not done
right. I'll check on this.
Bill

> Let him know the kingpin bushing reamer is piloted and is supposed to line
> ream them together. Most non atomotive machine shops wont have this style
> reamer available. The size is also very critical. The kingpin should fit
> very tight in the bushing. You should have to hammer it in when you
assemble
> it.



------------------------------

Date: Thu, 14 Sep 2000 23:07:16 -0400
From: admin ford-trucks.com
Subject: Subscription to forum at http://www.ford-trucks.com/cgi-b


Following are new messages posted in the Ford Truck
Enthusiasts message board forums.  If you have any
questions, please use the contact form on the web site.

To remove your subscription, visit our Message Board at
www.ford-trucks.com, login, view any forum and click the
subscription link.  If you are subscribed to any of our
mailing lists, you receive this message automatically
as part of that subscription and it can only be disabled
by unsubscribing from the mailing list.
Messages posted in 1948-1960 Ford trucks
===========================================================
"RE: F-2 HUB CAPS"
Posted by adbecker on 09/13/2000 07:16:35
http://www.ford-trucks.com/dcforum/48_60/302.html#6

"'49-'51 heater hoses, 6 cyl."
Posted by adbecker on 09/13/2000 07:35:46
http://www.ford-trucks.com/dcforum/48_60/396.html#0

"Heater"
Posted by barry on 09/13/2000 10:17:04
http://www.ford-trucks.com/dcforum/48_60/396.html#1

"RE: Heater"
Posted by adbecker on 09/13/2000 11:44:31
http://www.ford-trucks.com/dcforum/48_60/396.html#2

"RE: Heater"
Posted by barry on 09/13/2000 19:14:02
http://www.ford-trucks.com/dcforum/48_60/396.html#3

"1960 Wiindshield Wipers"
Posted by strk1960 on 09/13/2000 19:26:26
http://www.ford-trucks.com/dcforum/48_60/397.html#0

"RE: F-2 HUB CAPS"
Posted by iron57370 on 09/13/2000 19:39:05
http://www.ford-trucks.com/dcforum/48_60/302.html#7

"RE: 1960 Wiindshield Wipers"
Posted by Kenny on 09/13/2000 22:19:53
http://www.ford-trucks.com/dcforum/48_60/397.html#1

"RE: '59 manuals"
Posted by johna on 09/13/2000 23:25:52
http://www.ford-trucks.com/dcforum/48_60/375.html#6

"RE: '59 manuals"
Posted by Kenny on 09/14/2000 01:02:41
http://www.ford-trucks.com/dcforum/48_60/375.html#7

"RE: '59 manuals"
Posted by johna on 09/14/2000 01:22:02
http://www.ford-trucks.com/dcforum/48_60/375.html#8

"RE: '59 manuals"
Posted by johna on 09/14/2000 01:27:07
http://www.ford-trucks.com/dcforum/48_60/375.html#9

"RE: '59 manuals"
Posted by johna on 09/14/2000 01:29:12
http://www.ford-trucks.com/dcforum/48_60/375.html#10

"RE: mercury trucks"
Posted by Kenny on 09/14/2000 01:31:46
http://www.ford-trucks.com/dcforum/48_60/325.html#5

"RE: '59 F100 - Pretty good cab/bed - blown motor, ? auto tranny, 52k - what's she worth?"
Posted by johna on 09/14/2000 01:35:07
http://www.ford-trucks.com/dcforum/48_60/395.html#2

"RE: '59 manuals"
Posted by johna on 09/14/2000 01:37:50
http://www.ford-trucks.com/dcforum/48_60/375.html#11

"RE: 1960 Wiindshield Wipers"
Posted by viking on 09/14/2000 10:07:56
http://www.ford-trucks.com/dcforum/48_60/397.html#2

"Chassis Swap"
Posted by 58Model on 09/14/2000 10:42:15
http://www.ford-trucks.com/dcforum/48_60/398.html#0

"RE: '59 F100 - Pretty good cab/bed - blown motor, ? auto tranny, 52k - what's she worth?"
Posted by Kenny on 09/14/2000 12:39:48
http://www.ford-trucks.com/dcforum/48_60/395.html#3

"RE: '59 manuals"
Posted by Kenny on 09/14/2000 13:02:05
http://www.ford-trucks.com/dcforum/48_60/375.html#12

"RE: 4X4 conversion"
Posted by dinosaurfan on 09/14/2000 16:50:48
http://www.ford-trucks.com/dcforum/48_60/385.html#5

"RE: 4X4 conversion"
Posted by sled_dog on 09/14/2000 20:09:12
http://www.ford-trucks.com/dcforum/48_60/385.html#6

"RE: '59 manuals"
Posted by Kenny on 09/14/2000 22:34:20
http://www.ford-trucks.com/dcforum/48_60/375.html#13

"RE: Run To The Rock"
Posted by jowilker on 09/14/2000 23:16:33
http://www.ford-trucks.com/dcforum/48_60/382.html#3

"RE: 460 in 59 F100"
Posted by tschiller on 09/14/2000 23:24:00
http://www.ford-trucks.com/dcforum/48_60/389.html#9



------------------------------

End of pre61-list Digest V2000 #175
***********************************
----------------------------------------------------------
<><><><><><> Serious Help Finding That Part! <><><><><><>
Ford Truck Enthusiasts now has "Ford Products Interchange"
manuals in its online store.  Two editions: 1950-1965 and
1963-1974.  Cross references thousands of Ford parts.
<a href="http://www.motorhaven.com/">
http://www.motorhaven.com/</a>
----------------------------------------------------------
Ford Truck Enthusiasts 1948-1960 Truck List ....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.