Received: with LISTAR (v0.129a; list pre61-list); Fri, 01 Sep 2000 22:03:51 -0400 (EDT)
Date: Fri, 01 Sep 2000 22:03:51 -0400 (EDT)
From: Ford Truck Enthusiasts List Server <listar ford-trucks.com>
To: pre61-list digest users <listar ford-trucks.com>
Reply-to: pre61-list ford-trucks.com
Subject: pre61-list Digest V2000 #165
Precedence: list

==========================================================
Ford Truck Enthusiasts 1948-1960 Truck  Mailing  List

Visit our  web site: http://www.ford-trucks.com

To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe pre61-list" in the subject  of  the
message.
==========================================================

------------------------------------
pre61-list Digest Thu, 31 Aug 2000 Volume: 2000  Issue: 165

In This Issue:
Subscription to forum at http://www.ford-trucks.com/cgi-b
Re: I'm back! 56Merc
60 F 250 Paint and tranny
53 flat head into 48
1951 F1 FOR SALE!!!

----------------------------------------------------------------------

Date: Thu, 31 Aug 2000 21:52:18 -0400
From: admin ford-trucks.com
Subject: Subscription to forum at http://www.ford-trucks.com/cgi-b


Following are new messages posted in the Ford Truck
Enthusiasts message board forums.  If you have any
questions, please use the contact form on the web site.

To remove your subscription, visit our Message Board at
www.ford-trucks.com, login, view any forum and click the
subscription link.  If you are subscribed to any of our
mailing lists, you receive this message automatically
as part of that subscription and it can only be disabled
by unsubscribing from the mailing list.
Messages posted in 1948-1960 Ford trucks
===========================================================
"Find what part fits when all you have is the part#"
Posted by iron57370 on 08/25/2000 22:37:44
http://www.ford-trucks.com/dcforum/48_60/372.html#0

"RE: Find what part fits when all you have is the part#"
Posted by hotrodford_88 on 08/25/2000 23:01:19
http://www.ford-trucks.com/dcforum/48_60/372.html#1

"RE: Find what part fits when all you have is the part#"
Posted by iron57370 on 08/26/2000 00:09:56
http://www.ford-trucks.com/dcforum/48_60/372.html#2

"RE: Rear Ends"
Posted by 58Model on 08/26/2000 06:36:56
http://www.ford-trucks.com/dcforum/48_60/370.html#2

"RE: Find what part fits when all you have is the part#"
Posted by barry on 08/26/2000 08:43:00
http://www.ford-trucks.com/dcforum/48_60/372.html#3

"RE: Find what part fits when all you have is the part#"
Posted by Kenny on 08/26/2000 09:48:27
http://www.ford-trucks.com/dcforum/48_60/372.html#4

"RE: Find what part fits when all you have is the part#"
Posted by iron57370 on 08/26/2000 09:56:49
http://www.ford-trucks.com/dcforum/48_60/372.html#5

"RE: 1948-52,56 PARTS"
Posted by iron57370 on 08/26/2000 15:49:28
http://www.ford-trucks.com/dcforum/48_60/281.html#9

"RE: 56 FORD P/U"
Posted by iron57370 on 08/26/2000 15:53:15
http://www.ford-trucks.com/dcforum/48_60/362.html#1

"RE: 56 FORD P/U"
Posted by iron57370 on 08/26/2000 15:55:31
http://www.ford-trucks.com/dcforum/48_60/362.html#2

"RE: Find what part fits when all you have is the part#"
Posted by barry on 08/26/2000 20:06:38
http://www.ford-trucks.com/dcforum/48_60/372.html#6

"RE: 1948-52,56 PARTS"
Posted by barry on 08/26/2000 20:09:45
http://www.ford-trucks.com/dcforum/48_60/281.html#10

"RE: Find what part fits when all you have is the part#"
Posted by Kenny on 08/26/2000 22:26:47
http://www.ford-trucks.com/dcforum/48_60/372.html#7

"RE: Find what part fits when all you have is the part#"
Posted by iron57370 on 08/26/2000 23:00:38
http://www.ford-trucks.com/dcforum/48_60/372.html#8

"RE: 56 F-100 and 9"
Posted by 19dan56 on 08/27/2000 03:02:02
http://www.ford-trucks.com/dcforum/48_60/365.html#1

"RE: Tubular rivet tools"
Posted by sfal on 08/27/2000 05:03:36
http://www.ford-trucks.com/dcforum/48_60/371.html#1

"RE: Find what part fits when all you have is the part#"
Posted by barry on 08/27/2000 09:27:17
http://www.ford-trucks.com/dcforum/48_60/372.html#9

"RE: 56 F-100 and 9"
Posted by boo on 08/27/2000 14:13:57
http://www.ford-trucks.com/dcforum/48_60/365.html#2

"RE: 1948-52,56 PARTS"
Posted by boo on 08/27/2000 14:16:58
http://www.ford-trucks.com/dcforum/48_60/281.html#11

"RE: 53 ford -100"
Posted by phordman on 08/27/2000 14:43:49
http://www.ford-trucks.com/dcforum/48_60/373.html#1

"'59 info"
Posted by Kenny on 08/27/2000 17:33:18
http://www.ford-trucks.com/dcforum/48_60/375.html#0

"Paint and Rust Removal"
Posted by crisp on 08/27/2000 20:03:43
http://www.ford-trucks.com/dcforum/48_60/376.html#0

"RE: Tubular rivet tools"
Posted by Craig on 08/27/2000 21:49:12
http://www.ford-trucks.com/dcforum/48_60/371.html#2

"1955 F350 "
Posted by wino on 08/28/2000 10:17:54
http://www.ford-trucks.com/dcforum/48_60/377.html#0

"RE: Paint and Rust Removal"
Posted by boo on 08/28/2000 18:08:26
http://www.ford-trucks.com/dcforum/48_60/376.html#1

"RE: Paint and Rust Removal"
Posted by 58Model on 08/28/2000 20:44:38
http://www.ford-trucks.com/dcforum/48_60/376.html#2

"1953 F-250 v.i.n. deciphering"
Posted by rag on 08/28/2000 21:45:52
http://www.ford-trucks.com/dcforum/48_60/378.html#0

"RE: Find what part fits when all you have is the part#"
Posted by android on 08/28/2000 21:46:08
http://www.ford-trucks.com/dcforum/48_60/372.html#10

"RE: I have 48/49/50 rear steel fenders "
Posted by android on 08/28/2000 21:50:19
http://www.ford-trucks.com/dcforum/48_60/358.html#1

"RE: F100 Question"
Posted by android on 08/28/2000 21:53:01
http://www.ford-trucks.com/dcforum/48_60/273.html#2

"RE: 1949 Dualies?"
Posted by android on 08/28/2000 22:00:13
http://www.ford-trucks.com/dcforum/48_60/199.html#3

"RE: free 1950 engine"
Posted by android on 08/28/2000 22:02:57
http://www.ford-trucks.com/dcforum/48_60/233.html#1

"49 F-3  VIN  INFO"
Posted by android on 08/28/2000 22:09:39
http://www.ford-trucks.com/dcforum/48_60/379.html#0

"RE: mercury trucks"
Posted by m100dave on 08/29/2000 01:20:54
http://www.ford-trucks.com/dcforum/48_60/325.html#4

"RE: 1948-52,56 PARTS"
Posted by CLAM_DIGGER on 08/29/2000 07:46:58
http://www.ford-trucks.com/dcforum/48_60/281.html#12

"1960 Power Steering/Fuel Tank"
Posted by disvnvet on 08/29/2000 10:21:02
http://www.ford-trucks.com/dcforum/48_60/380.html#0

"RE: 1953 F-250 v.i.n. deciphering"
Posted by Kenny on 08/29/2000 23:35:52
http://www.ford-trucks.com/dcforum/48_60/378.html#1

"Where in Somerville?"
Posted by f4fran on 08/30/2000 13:33:42
http://www.ford-trucks.com/dcforum/48_60/381.html#0

"RE: 1953 F-250 v.i.n. deciphering"
Posted by rag on 08/30/2000 22:18:37
http://www.ford-trucks.com/dcforum/48_60/378.html#2



------------------------------

Date: Fri, 1 Sep 2000 01:36:56 -0400
From: Ray Cardogno <abcinc tiac.net>
Subject: Re: I'm back! 56Merc

Hey Merc!!

Ray C 53-56



------------------------------

From: BOBWOOD536 aol.com
Date: Fri, 1 Sep 2000 04:46:33 EDT
Subject: 60 F 250 Paint and tranny

Mike,
According to my 60 manual the L code is Dark Green. As far as the tranny
there is 9 different tranny's listed. They are:
J-M/D Clark 250 V (direct)
K-M/D Clark 250 VO (overdrive)
L-H/D CLark 265 V (direct)
M-H/D Clark 264 VO (overdrive)
N-EH/D Spicer 5652 (direct)
P-EH/D Spicer 5765B (direct)
Q-EH/D Spicer 6352 (dierct)
R-EH/D Spicer 6852G (direct)
S-EH/D Spicer 6435A (overdrive)
Hope this helps.
Bob Wood
60 F100
302/C6

------------------------------

From: "Bob Jones" <bobj pmihwy.com>
Subject: 53 flat head into 48
Date: Fri, 1 Sep 2000 17:40:13 -0500

I need to know if a 53 F-350 flathead will fit into a '48 F-1 without any
problems.  Are the mounts the same and will the oil pan fit OK?  I will be
replacing the four speed on the 53 with a '49 three speed.

Thanks for any info,
Bob Jones
'49 F-2
'48 F-1 panel


------------------------------

Date: Fri, 01 Sep 2000 19:57:39 -0700
From: Dan Wentz <dwentz earthlink.net>
Subject: 1951 F1 FOR SALE!!!

I was contacted by a guy who wants to sell a 51 he inherited. It's a
project truck that was left unfinished. Everything is there to complete the
truck with the exception of engine/transmission/rear end. It has a Dodge
Dynasty front clip. I have pictures of it and the body looks to be in good
shape. The truck is in Buckley, WA (about 1 hour S.E. of Seattle) and the
owner wants $700. Email me for pictures and/or contact info.

Note: I have no connection to the seller. I'm just passing along information.

~Dan

1950 F1 351C--Not neglected and definitely not for sale.  Persistence is
futile.
1998 Explorer--With tires made in NC.  Not recalled--yet..




------------------------------

End of pre61-list Digest V2000 #165
***********************************
----------------------------------------------------------
<><><><><><> Serious Help Finding That Part! <><><><><><>
Ford Truck Enthusiasts now has "Ford Products Interchange"
manuals in its online store.  Two editions: 1950-1965 and
1963-1974.  Cross references thousands of Ford parts.
<a href="http://www.motorhaven.com/">
http://www.motorhaven.com/</a>
----------------------------------------------------------
Ford Truck Enthusiasts 1948-1960 Truck List

Send posts to pre61-list....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.