Received: with LISTAR (v0.129a; list pre61-list); Tue, 29 Aug 2000 11:08:07 -0400 (EDT)
Date: Tue, 29 Aug 2000 11:08:07 -0400 (EDT)
From: Ford Truck Enthusiasts List Server <listar ford-trucks.com>
To: pre61-list digest users <listar ford-trucks.com>
Reply-to: pre61-list ford-trucks.com
Subject: pre61-list Digest V2000 #162
Precedence: list

==========================================================
Ford Truck Enthusiasts 1948-1960 Truck  Mailing  List

Visit our  web site: http://www.ford-trucks.com

To unsubscribe, send email to: listar ford-trucks.com with
the words "unsubscribe pre61-list" in the subject  of  the
message.
==========================================================

------------------------------------
pre61-list Digest Tue, 29 Aug 2000 Volume: 2000  Issue: 162

In This Issue:
Speedometer Repair
Speedometer Needle
hubcaps 4 U
removal of valves

----------------------------------------------------------------------

From: checker jps.net
Date: Mon, 28 Aug 2000 23:29:22 -0700
Subject: Speedometer Repair

I have a question for those of you who may have faced the same problem:
Can the speedometer needle be replaced after it's been broken off the
stem?  What I have is a '50 speedometer which when recieved had the
--
Tulio Solorzano
'50 F-1 (newest member to the family)
'60 F-100 Custom Cab
'77 280z, '78 Jeep CJ5 &
'79 Harley Sportster

------------------------------

From: checker jps.net
Date: Mon, 28 Aug 2000 23:34:35 -0700
Subject: Speedometer Needle

I have a question for those of you who may have faced the same problem:
Can the speedometer needle be replaced after it's been broken off the
stem?  What I have is a '50 speedometer which when recieved had the
needle busted off and missing.  Others have this problem?

Sorry posted twice... problem with mouse pad! grr

--
Tulio Solorzano
'50 F-1 (newest member to the family)
'60 F-100 Custom Cab
'77 280z, '78 Jeep CJ5 &
'79 Harley Sportster

------------------------------

From: gucci007 juno.com
Date: Tue, 29 Aug 2000 00:17:22 -0700
Subject: hubcaps 4 U

A while back someone was looking for hubcaps, and I couldn't find my
receipt.  FOUND IT!  In the greater Seattle area the BEST place I have
found to get any hubcap is Hubcap Annie.  They have every possible hubcap
you could want.  I got a set of 4 15" baby moons, 2" deep, to fit over 10
1/8" clip-clip for $48 in August 99.  Called down, they knew exactly what
I wanted and had it waiting for me under the counter when I got there two
hours later.  No website, but phone is (206)365-4994 or 1-800-627-7880.
For locals, they are at 3001 NE 127th St., one block west of Lake City.
M-F 9-5, Sat 10-4, closed for lunch.
They really helped me, hope they help someone else, too.

Matt and Toulouse ('48 F-1)

------------------------------

Date: Tue, 29 Aug 2000 11:27:26 -0500
From: Doug Siedsma <image cameragraphics.com>
Subject: removal of valves

Help!
I have a '51 6 cyl. H series...Trying to remove the valves.  I have
found an old valve spring compressor which works fine but cannot figure
out how the retainers are removed. Any of you serious motorheads out
there lend a rookie a hand..The shop manual is of no help in that area
nor an old Chilton's that I have..
Thanks,
Doug


------------------------------

End of pre61-list Digest V2000 #162
***********************************
----------------------------------------------------------
<><><><><><> Serious Help Finding That Part! <><><><><><>
Ford Truck Enthusiasts now has "Ford Products Interchange"
manuals in its online store.  Two editions: 1950-1965 and
1963-1974.  Cross references thousands of Ford parts.
<a href="http://www.motorhaven.com/">
http://www.motorhaven.com/</a>
----------------------------------------------------------
Ford Truck Enthusiasts 1948-1960 Truck List

Send posts to pre61-list ford-trucks.com

If  you  ever  want  to  remove yourself from this mailing
list, send an email to:

listar ....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.