From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V3 #370
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com
Errors-To: owner-pre61-list-digest ford-trucks.com
Precedence: bulk


pre61-list-digest Saturday, December 18 1999 Volume 03 : Number 370



=======================================================================
Ford Truck Enthusiasts - 1948 - 1948 truck and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

Re: FTE Pre61 - Carburetor pump link pin mods
FTE Pre61 - vin decoder
FTE Pre61 - Carburetor pump link pin mods
Re: FTE Pre61 - vin decoder
Re: FTE Pre61 - Voting?? Ken L K Please

=======================================================================

----------------------------------------------------------------------

Date: Fri, 17 Dec 1999 20:31:01 -0800
From: sdelanty sonic.net
Subject: Re: FTE Pre61 - Carburetor pump link pin mods

Jeff wrote:
>My truck, a 1950 F3, has the 239 V8 and original carb.
>The link pin is real loose in the pump link (well, the
>thingie with the three holes, whatever it is called).
>It has worked its way loose once before, but that is
>another story. I was thinking of running the piece by
>a machine shop and seeing if they could attach something
>to the pin so that it would stay in the hole better (I
>don't foresee changing holes ever). My question is if
>anyone else has had this problem and any suggestions on
>how else to resolve it.

Maybe drill a small hole thru the rod and slip a cotter pin in it?

Steve
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.sonic.net/~sdelanty

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 18 Dec 1999 00:27:46 -0600
From: "Terry"
Subject: FTE Pre61 - vin decoder

The VIN number is F10D3D20988

F10 1/2 ton pickup
D 215 6 cyl
3 1953
D Dallas Texas (YEA!!!!!)
20988 Consecutive unit number.

LOOK AT ME!!!!!!! I finally contributed something worth while. OH BOY!!
Santa is going to pay me a visit this year!
WAHOO!!!!!!

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 18 Dec 1999 00:38:43 -0600
From: "Terry"
Subject: FTE Pre61 - Carburetor pump link pin mods

The first person who suggestions swapping in another
manufacturer's engine gets a trout slap... :)

ROTFLMAOPIMPCOTBIMN!!!!!!

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 17 Dec 1999 22:30:03 -0800
From: Dan Wentz
Subject: Re: FTE Pre61 - vin decoder

>Hi Gang. A friend of mine has an old Ford (with a Ford engine in it) and he
>is trying to find out about the VIN numbers. Can one of you guys help us
out?
>The VIN number is F10D3D20988

It's a 1953 F100 w/ 215 cid 6 cyl engine, assembled at the Dallas plant
and was the 20,988th truck off the line that year.

~Dan

1950 F1 351C--Who needs a heater? Just don't insulate your firewall!
1992 Mustang LX--Wash me.

Visit my Bonus Built 48-52 F Series Site: http://www.ford-trucks.com//lc/lc.php?action=do&link=http://home.earthlink.net/~dwentz
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 18 Dec 1999 00:16:49 -0800
From: "Ray Cardogno"
Subject: Re: FTE Pre61 - Voting?? Ken L K Please

The following is the only thing I am seeing at the voting page relating somewhat to all the hubbub about non-ford mods:

(copy)
Should we create a list to cover non-Ford and after-market customization of Ford trucks? [12 votes total]
Yes! 6(50%)
No! 4(33%)
Who Cares? 2(16%)

Shouldn't another question be something like:

Is it OK to mention the use of non-ford mods on our existing lists as long as it does not dwell on the technical aspects of the non-ford mods?

Am I missing the relevant issue? I know I don't have time to subscribe to yet another list which would probably be so all-encompassing by way of ford year/models so as to water-down the good, targeted discussions we have enjoyed for so long.

If the new list gets rejected, does that mean we still can't talk about our mopar engines?

If it gets approved does it mean we have to talk with another set of list members (basically get shunned from talking about our trucks with folks we've been talking with for a long time and have a "relationship" with)?

Ray C


Angelfire for your free web-based e-mail. http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.angelfire.com
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V3 #370
********************************

+- Ford Truck Enthusiasts - 1948 - 1960 Trucks and vans --------------+
| Send posts to pre61-list....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.