From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V3 #346
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com
Errors-To: owner-pre61-list-digest ford-trucks.com
Precedence: bulk


pre61-list-digest Sunday, November 28 1999 Volume 03 : Number 346



=======================================================================
Ford Truck Enthusiasts - 1948 - 1948 truck and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Pre61 - Re: FTE PF Group - Virtually Meeting
Re: FTE Pre61 - Electric wipers - again
FTE Pre61 - radiator ID
Re: FTE Pre61 - Electric wipers - again
FTE Pre61 - Chat Time
Re: FTE Pre61 - Chat Time
Re: FTE Pre61 - Chat Time

=======================================================================

----------------------------------------------------------------------

Date: Sat, 27 Nov 1999 10:56:56 -0500
From: "sam fugate"
Subject: FTE Pre61 - Re: FTE PF Group - Virtually Meeting

- ----- Original Message -----
From: sam fugate
To: list
Sent: Saturday, November 27, 1999 10:54 AM
Subject: Fw: FTE PF Group - Virtually Meeting


>
> ----- Original Message -----
> From: sam fugate
> To:
> Sent: Saturday, November 27, 1999 10:51 AM
> Subject: Re: FTE PF Group - Virtually Meeting
>
>
> > Don,
> > Either day is fine wih me, Although I remain relativly quiet on the list
I
> > will be in the chat room 9:00 P.M. on both days. Glad to know we
don't
> > have to start all over again.
> > For those of you who haven't heard from me:
> > 1952 FORD F1,
> > 255 MERC bored .030 over, EDELBROCK heads, ISKY MAX 1 cam, OFFENHAUSER
2x2
> > HOLLEY 94's, Electric fuel pump ,
> > Full Flow oil filter system, MUSTANG II Front IFS, C4 tranny, Power
disk
> > brakes all around, 3:55.1 9" LINCOLN MK V Rear end.shortened 6" and
> mounted
> > on top of the springs . I am just now completing the bottom end of a
> frame
> > off restofication, and have done all the work myself including necessary
> > fabrication. Ihave been taking pictures all along the way and hope to
get
> > them posted to my web site soon. The weather in KY. has been perfect for
> > this kind of work and I'm taking advntage of it. Couldn't do a thing all
> > summer, too HOT. anyway,,,,,,, if any of you guys out there are
planning
> on
> > doing some of the same stuff to your 51-52 and haven't yet maybe I can
> > save you some time!
> > L8R
> > Sam I Am
> > ----- Original Message -----
> > From: The Neighbors
> > To: FTE Core ; FTE/AFTE
> > ; FTE/AFTE Pigeon Forge
> > ; Chris Ferino ;
> Dave
> > Resch ; Dave Resch ; Gary
> > Peters ; Jim Cron ; Ken Payne
> > ; Peters, Gary (G.R.) ;
Stu
> > Varner ; Stu Varner ;
> > Wayne Foy ; William Vierra
> >
> > Sent: Saturday, November 27, 1999 8:49 AM
> > Subject: FTE PF Group - Virtually Meeting
> >
> >
> > > Hey Gang!
> > >
> > > A couple of days ago when I announced the corporation paperwork was
> > > FINALLY straightened up, I suggested an online meeting for Monday. The
> > > next day Ken suggested a meeting for Sunday, for the same reason of
> > > getting our official organizational meeting taken care of. The
response
> > > has been minimal.
> > > --
> > > Don Neighbors
> > > President, AFTE
> > > '54 F250 Named Grover
> > >
> > > "Any dropped tool or part will automatically fall into the most
> > > inaccessible part of the vehicle."
> > >
> > > grover ford-trucks.com
> > > = Ford Truck Enthusiasts - Pigeon Forge Committee
> > >
> >
>

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 27 Nov 1999 11:14:46 -0500
From: "Bill Robinson"
Subject: Re: FTE Pre61 - Electric wipers - again

I think it's Frank Oddo, not Otto.
- -----Original Message-----
From: Don Lewis
To: pre61-list ford-trucks.com
Date: Saturday, November 27, 1999 2:15 AM
Subject: FTE Pre61 - Electric wipers - again


>I'm still collecting options for converting from vacuum to electric. About
>a year to a year & 1/2 ago Street Rodder had an article by Frank Otto
>detailing a conversion of 40 Ford convertible electric wipers to 40-46
>truck cabs. Does anyone know which issue that was in?
>Don Lewis
>'46 1/2 ton
>== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html
>

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 27 Nov 1999 18:37:31 -0500
From: "Gary L. Perry"
Subject: FTE Pre61 - radiator ID

Have radiator maybe from 50's, trying to ID.
Number's on tank:

TAAM-AI (or 1)
------------------
P-MO
58 2

I'm thinking that 58 is the year?? Other is Part no.???
If anyone has parts book and could tell me what this is
for, Thanx. "G"

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 27 Nov 1999 15:47:14 -0800
From: "Tom Ewing"
Subject: Re: FTE Pre61 - Electric wipers - again

Don. I can't believe that I know of this article, but I think I have it or
one very similar. I'm a big Frank Oddo fan. Do you have his Street Rodders
Handbook? The article I'm looking at is titled Don't sing the
Stormy-Weather Blues anymore... page 140 Street Rodder Oct 1997.
Good luck Tom.

- ----- Original Message -----
From: Don Lewis


> I'm still collecting options for converting from vacuum to electric. About
> a year to a year & 1/2 ago Street Rodder had an article by Frank Otto
> detailing a conversion of 40 Ford convertible electric wipers to 40-46
> truck cabs. Does anyone know which issue that was in?


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 27 Nov 1999 20:34:19 -0600
From: "MARK AMES"
Subject: FTE Pre61 - Chat Time

I was just trying to get in touch with people and talk trucks. I figure =
most of us should have Sunday evening free. I work week nights so this is =
the best time for me. I'm usally in there Sunday evenings 7:00 To 10:00 =
P.M. CST maybe even later. What Im trying to get going here is a regular =
weekly time where we can get together and chat. Maybe I should get into =
ICQ too.

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 27 Nov 1999 22:09:48 -0800
From: "Ray Cardogno"
Subject: Re: FTE Pre61 - Chat Time

Hi folks. I'll try to be there too. It's been a while. BTW, What's ICQ?

Ray C,
formerly known on chat as 53-56 Now I got a 48 and a 61 too so I'll be 48-61

Later
- --

On Sat, 27 Nov 1999 20:34:19 MARK AMES wrote:
>I was just trying to get in touch with people and talk trucks. I figure most of us should have Sunday evening free. I work week nights so this is the best time for me. I'm usally in there Sunday evenings 7:00 To 10:00 P.M. CST maybe even later. What Im trying to get going here is a regular weekly time where we can get together and chat. Maybe I should get into ICQ too.
>
>^ FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html
>


Angelfire for your free web-based e-mail. http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.angelfire.com
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 27 Nov 1999 23:49:46 -0800
From: Dan Laray
Subject: Re: FTE Pre61 - Chat Time

address?

MARK AMES wrote:

> I was just trying to get in touch with people and talk trucks. I figure most of us should have Sunday evening free. I work week nights so this is the best time for me. I'm usally in there Sunday evenings 7:00 To 10:00 P.M. CST maybe even later. What Im trying to get going here is a regular weekly time where we can get together and chat. Maybe I should get into ICQ too.

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.