From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V3 #276
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com
Errors-To: owner-pre61-list-digest ford-trucks.com
Precedence: bulk


pre61-list-digest Sunday, September 26 1999 Volume 03 : Number 276



=======================================================================
Ford Truck Enthusiasts - 1948 - 1948 truck and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Pre61 - Y block dual exhaust manifolds
Re: FTE Pre61 - Fenton intake
FTE Pre61 - RE: Front Axle
Re: FTE Pre61 - Carlisle next week
Re: FTE Pre61 - Fenton intake
FTE Pre61 - Here's the next one
Re: FTE Pre61 - RE: Front Axle
Re: FTE Pre61 - Here's the next one
Re: FTE Pre61 - 57 locks
Re: FTE Pre61 - 57 locks
FTE Pre61 - Wiring Harness
Re: FTE Pre61 - speedometer cable
Re: FTE Pre61 - 52 locks?
Re: FTE Pre61 - 52 locks?
FTE Pre61 - Re: Reply to Don

=======================================================================

----------------------------------------------------------------------

Date: Sat, 2 Oct 1999 11:18:00 +0200
From: "Greg Schnakenberg"
Subject: FTE Pre61 - Y block dual exhaust manifolds

Are these the infamous RAM TUBES, or are they just normal flow manifolds,
with outlets changed to be conducive to dual applications? They are
EDB 9430 A left side
and
B9A 9430 A right side

any help? thanks, Greg



== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 09:49:14 EDT
From: Flathead52 aol.com
Subject: Re: FTE Pre61 - Fenton intake

I've installed new rubber mounts. The motor is centered in the frame, It's
the intake mount that's offset.

Tom
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 10:15:59 EDT
From: GEMcC5150 aol.com
Subject: FTE Pre61 - RE: Front Axle

Mid fifty has the axle and install parts you are looking for, page 118 1998
catalog.
2.5, 3, 4 in drop along with King pin set. This one was a simple request
glade I could help.

George
55 F100

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 14:52:00 EDT
From: TNickolson aol.com
Subject: Re: FTE Pre61 - Carlisle next week

Thanks for your reply. I would prefer one that works, FM is not important or
necessary I need the knobs to in restorable condition or can be purchased
from vendors. $150.00 is well within the range I am willing to spend. My F1
has been restored to a 50's hot rod with all the original parts, therefore
originality is the most important object. I can send you a check as soon as
you need. If you wish to call, my day time number is 561-842-3999 evenings
561 744-1398.

Thank you


Tom Nickolson
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 14:53:36 EDT
From: TNickolson aol.com
Subject: Re: FTE Pre61 - Fenton intake

I had the same problem and took 1/4 inch off the fan blade.


Tom Nickolson
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 16:15:15 EDT
From: Flathead52 aol.com
Subject: FTE Pre61 - Here's the next one

I picked up a radiator at a swap meet for my 52 F-1. I took it to a shop
and had them go thur it, It checked out fine. I sold my old one that leaked.
Now when I went to install my new stainless steel upper hoses, I find that
the top neck on the radiator is bigger then an inch and a quarter. Any Ideas?

Tom Grover
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 18:39:41 -0500
From: mustangclub
Subject: Re: FTE Pre61 - RE: Front Axle

Hi George,
Sorry. Mid fifty's DOES NOT carry dropped axles, even though they are
listed in there catalog! Been there, done that! Thanks anyway.
Don

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 20:20:07 EDT
From: TNickolson aol.com
Subject: Re: FTE Pre61 - Here's the next one

Only one choice, have new connections soldered on. That's not hard or
expensive.

Tom Nickolson
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 18:08:14 -0700 (PDT)
From: cliff lynn
Subject: Re: FTE Pre61 - 57 locks

i currently own a 57 and the doors lock by pushing the
handles forwad but u have to use the key to lock the
drivers door
hope this help you

cliff

- --- "Frank Mester Jr." wrote:
> And its raining and the windows are open!
>
> Frank Stock '51
>
> Fred g 454 wrote:
>
> > Help!!! I locked myself in my truck...and I can't
> get out!
> >
> > Sorry, couldn't resist.
> > Fred
> > hotrod56
> >
> > RJC988 aol.com wrote:
> >
> > >
> > > I seem to remember being able to lock the cab
> doors from inside by pushing
> > > the handles forward on 1950's and earlier
> trucks. This does nothing in my
> > > '57 F-100. Did the '57 have this door-locking
> feature? >>
> > >
> > > Ken,
> > > My 57 locked by pushing in the opposite
> direction of opening. I can't
> > > remember which was which.
> > > Glenn in TN
> >
> > == FTE: Uns*bscribe and posting info
> http://www.ford-trucks.com/faq.html
>
> == FTE: Uns*bscribe and posting info
> http://www.ford-trucks.com/faq.html
>


=====

Cliff
__________________________________________________
Do You Yahoo!?
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 18:07:31 -0700 (PDT)
From: cliff lynn
Subject: Re: FTE Pre61 - 57 locks

i currently own a 57 and the doors lock by pushing the
handles forwad but u have to use the key to lock the
drivers door
hope this help you

cliff

- --- "Frank Mester Jr." wrote:
> And its raining and the windows are open!
>
> Frank Stock '51
>
> Fred g 454 wrote:
>
> > Help!!! I locked myself in my truck...and I can't
> get out!
> >
> > Sorry, couldn't resist.
> > Fred
> > hotrod56
> >
> > RJC988 aol.com wrote:
> >
> > >
> > > I seem to remember being able to lock the cab
> doors from inside by pushing
> > > the handles forward on 1950's and earlier
> trucks. This does nothing in my
> > > '57 F-100. Did the '57 have this door-locking
> feature? >>
> > >
> > > Ken,
> > > My 57 locked by pushing in the opposite
> direction of opening. I can't
> > > remember which was which.
> > > Glenn in TN
> >
> > == FTE: Uns*bscribe and posting info
> http://www.ford-trucks.com/faq.html
>
> == FTE: Uns*bscribe and posting info
> http://www.ford-trucks.com/faq.html
>


=====

Cliff
__________________________________________________
Do You Yahoo!?
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 21:13:09 EDT
From: FISHROT1 aol.com
Subject: FTE Pre61 - Wiring Harness

Anyone know where I can find an OEM style wiring harness for a 1960 f-100. I
know that there are these after market style painless wiring kits and stuff,
but I would like to stay with the original style harness.

Erik
1960 F-100 Custom Cab
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 18:12:49 -0700 (PDT)
From: cliff lynn
Subject: Re: FTE Pre61 - speedometer cable

GO to the parts store and buy one!!!!!!!!!!!

- --- Terry Jones wrote:
> I need a Speedo cable for a '60 F-100 and a C-6.
> Any help will be
> appreciated.
>
> Thanks Terry
> 1960 F-100 460 Must.II IFS fleetside
>
> == FTE: Uns*bscribe and posting info
> http://www.ford-trucks.com/faq.html
>


=====

Cliff
__________________________________________________
Do You Yahoo!?
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 21:26:00 EDT
From: PWPTRUCK1 aol.com
Subject: Re: FTE Pre61 - 52 locks?

While we are on the subject of door locks, my 52 F-3 has a outside key lock
on the passenger side, but nothing on the drivers side. Is there a secret on
the '52's for locking the driver's door that I don't know about?

Paul
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 25 Sep 1999 20:19:47 -0700 (PDT)
From: Scott
Subject: Re: FTE Pre61 - 52 locks?

All you have to do is lift the inside handle so it is level or
something like that. Just move the handle opposite way that you do to
open the door.
Scott

- --- PWPTRUCK1 aol.com wrote:
> While we are on the subject of door locks, my 52 F-3 has a outside
> key lock
> on the passenger side, but nothing on the drivers side. Is there a
> secret on
> the '52's for locking the driver's door that I don't know about?
>
> Paul
> == FTE: Uns*bscribe and posting info
> http://www.ford-trucks.com/faq.html
>


=====
Come take a look at my 1952 Ford Pickup Page:
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.geocities.com/motorcity/downs/9731/




__________________________________________________
Do You Yahoo!?
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sun, 26 Sep 1999 00:05:09 EDT
From: VegmanOCF aol.com
Subject: FTE Pre61 - Re: Reply to Don

Have you considered reverse-eye mono leaf springs? I just put a set on my....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.