From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V3 #216
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com
Errors-To: owner-pre61-list-digest ford-trucks.com
Precedence: bulk


pre61-list-digest Saturday, July 31 1999 Volume 03 : Number 216



=======================================================================
Ford Truck Enthusiasts - 1948 - 1948 truck and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

Re: FTE Pre61 - 56 F250 hood
FTE Pre61 - Hub Cap Frustration---
FTE Pre61 - Stang II in a 52 F-1

=======================================================================

----------------------------------------------------------------------

Date: Fri, 30 Jul 1999 18:53:07 -0400
From: "Jason Piccola"
Subject: Re: FTE Pre61 - 56 F250 hood

I think you can use an F-100 hood on a F-250. We had a discussion earlier
regarding front fenders and if they were the same size on the F100 and
F250. I have heard that the cab bodies were the same size so I assume that
the Hood would be the same as well.

Jason Piccola
55' F-250

Ennui880 aol.com wrote:

> Does anyone know if the hood from a1956 F100 can be used on an F250?
> My roommate smacked my F250 up on the freeway, and the hood's history.
> Since F250 body parts are so rare, I was hoping maybe an F100 hood
> would fit. (rear fenders do, sort of).
> The funny thing is that the front grille came out completely unscathed.
> (I say "funny" even though I'm still crying)
>
> Steve
> == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 30 Jul 1999 18:38:25 EDT
From: BeanUh1 aol.com
Subject: FTE Pre61 - Hub Cap Frustration---

>I still have not found hubcaps for my 52 F-2 and believe that they may be
>non-existent. I thank all of you who send leads but none of them worked
out.
> The F-1 caps are easy to find, but the caps for the 3/4 ton believe me are
>rare. Does anyone have any other ideas? I have found some hubcaps with
FORD
>on them which are too big and some that are too small. I understand that
>they offered caps as an accessory, and my guess, the farmers where I bought
>my truck, didn't need them to "look pretty". Appecriate any help anyone can
>give.
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 30 Jul 1999 23:30:56 EDT
From: Flathead52 aol.com
Subject: FTE Pre61 - Stang II in a 52 F-1

Hello all
I bit the bullet, I have a guy installing a mustang suspension under my
f-1. I need to change the steering column because of the angle of the old
column. I would like to get a used column. Any ideas what I can use as a
donor? I want to try to stay away from an ignition switch in the column. I
also don't need a shifter. But tilt would be nice. I'm not asking for much
... well if your going to dream go big.....

thanks

Tom
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V3 #216
********************************

+- Ford Truck Enthusiasts - 1948 - 1960 Trucks and vans --------------+
| Send posts to pre61-list ....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.