From: owner-pre61-list-digest ford-trucks.com (pre61-list-digest)
To: pre61-list-digest ford-trucks.com
Subject: pre61-list-digest V3 #214
Reply-To: pre61-list ford-trucks.com
Sender: owner-pre61-list-digest ford-trucks.com
Errors-To: owner-pre61-list-digest ford-trucks.com
Precedence: bulk


pre61-list-digest Thursday, July 29 1999 Volume 03 : Number 214



=======================================================================
Ford Truck Enthusiasts - 1948 - 1948 truck and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomo ford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Pre61 - Hubcaps 1960 Mercury
FTE Pre61 - I'm Back
FTE Pre61 - re: Autoshow info for Peggy
FTE Pre61 - 390 Pinging after 55mph
FTE Pre61 - 56 F250 hood

=======================================================================

----------------------------------------------------------------------

Date: Wed, 28 Jul 1999 08:50:41 -0700
From: "Barry Simmons"
Subject: FTE Pre61 - Hubcaps 1960 Mercury

I am posting this for a friend who owns this vehicle. He is trying to get
it registered as a collectors truck but has been turned down because it
doesn't have hubcaps. He has information from somewhere that hubcaps were
an option on this vehicle. Can anyone out there help? Anyone with hubcaps
or proof that it was in fact an option. His truck is in quite good
condition. It has the rap-around rear window which makes it quite distinct.
I don't have any other information at this time.
Thanks!


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Wed, 28 Jul 1999 17:29:40 -0600
From: "David M. Ackerschott"
Subject: FTE Pre61 - I'm Back

Greetings, well it took be a few months but i'm back, still hard at work on
my 1953 Ford F100 "Sweet + Low" i will also soon have my web page back up so
i will post with the new address soon.

A couple of months back i was looking for an oil pan for a 351 Cleveland and
someone was kind enough to let me know about
a gentleman in florida who could help me. I lost his number in the
move...So does this post bring anything to memory, It's a rear sump
oil pan so I can use the motor with my mustang II front end. if memory
serves me right, the gentlemans name is george.........any help
will be greatly appreciated, i am also looking for a truck club to join
i am in the Venice, Ca. area......thanks doubledoubledavid

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Wed, 28 Jul 1999 22:59:14 -0400
From: Ken Payne
Subject: FTE Pre61 - re: Autoshow info for Peggy

>Date: Wed, 28 Jul 1999 03:01:02 -0500
>From: "Terry Jones"
>Subject: FTE Pre61 - Auto show info for Peggy

>I know it took a long time to get this info for oyu as per your request, but
>I promise I did not forget. I was having a very hard time finding it.
> One of my friends at work told me the web site. The site is
>http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.cruisinthecoast.com
> This should give you the info you are looking for.
> Sorry for the delay, Terry


Thanks Terry, I'll make sure Peggy gets your email.

Later,
Ken

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 29 Jul 1999 00:10:18 -0700
From: Person
Subject: FTE Pre61 - 390 Pinging after 55mph

Ted,

I appreciate your interest in the resolve of this darned annoying
problem! I have not had time to do anything about it yet due to
Property Building Inspectors being in my hair at this time in my life!
I have property issues to resolve then I can get back to luxuries of
taking care of my truck. I have clipped all the troubleshooting tips
from the newsgroup that were sent regarding my problem and will review
and try each one that seems plausible. I have already begun to use only
92 octane but have not been on the freeway lately. Will let you know as
soon as I get to it and resolve it!!


>
> Date: Mon, 26 Jul 1999 20:44:02 -0400
> From: "Ted and Sarah Freeman"
> Subject: Re: FTE Pre61 - FORD 390 pinging past 55mph
>
> Tulio,
>
> Just curious how the troubleshooting is going?
>
> - -Ted
>
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 29 Jul 1999 03:42:49 EDT
From: Ennui880 aol.com
Subject: FTE Pre61 - 56 F250 hood

Does anyone know if the hood from a1956 F100 can be used on an F250?
My roommate smacked my F250 up on the freeway, and the hood's history.
Since F250 body parts are so rare, I was hoping maybe an F100 hood
would fit. (rear fenders do, sort of).
The funny thing is that the front grille came out completely unscathed.
(I say "funny" even though I'm still crying)

Steve
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V3 #214
********************************

+- Ford Truck Enthusiasts - 1948 - 1960 Trucks and vans --------------+
| Send posts to pre61-list....


To access the rest of this feature you must be a logged in Registered User Of Ford Truck Enthusiasts

Registration is free, easy and gives you access to more features.
If you are not registered, click here to register.
If you are already registered, you can login here.

If you are already logged in and are seeing this message, your web browser is blocking session cookies. Change your browser cookie settings to allow session cookies.




Advertising - Terms of Use - Privacy Policy - Jobs

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford is a registered trademark of the Ford Motor Company.